The 2016 Jeep Wrangler is equipped with an oil change indicator light that comes on when the vehicle is due or past due for an oil change service. To reset the 2016 Jeep Wrangler oil change indicator after an oil change service, please follow these instructions: 1. Turn the ignition to run (one position before […]
To reset the 2016 Honda Pilot maintenance light after an oil change, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Using the UP or DOWN arrows on the right side of the steering wheel, select the VEHICLE menu. 3. From the VEHICLE menu select MAINTENANCE INFO. 4.
To reset the 2016 GMC Savana remaining oil life after an oil change, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. Turn the ignition off and then start the engine to
To reset the 2016 Ford Fiesta oil light after an oil change, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Press the brake and gas pedals at the same time; after 3 seconds the “Service: Oil reset in prog.” message will appear and after 25 seconds the
To reset the 2016 Chevrolet Equinox remaining oil life after an oil change, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. *Press the MENU button until vehicle information menu is displayed then scroll through the menu with the down arrow until Remaining Oil Life is selected then
2016 Chevrolet Equinox Remaining Oil Life Reset Read More »
To reset the 2016 Cadillac CT6 remaining oil life after an oil change, please follow these instructions: 1. Turn the ignition on (do not start the engine). 2. Using the DIC buttons (right side of steering wheel), display REMAINING OIL LIFE on the DIC. 3. Press and hold SEL to clear the CHANGE ENGINE OIL
To reset the 2016 Honda HR-V maintenance light after an oil change service, please follow these instructions: 1. Turn the ignition switch to run (do not start the engine). 2. Display the engine oil life by repeatedly pressing the SELECT/RESET knob. 3. Press and hold the knob for 10 seconds or more. The engine oil
To reset the 2016 Volvo S60 service reminder indicator (SRI) after an oil change service, please follow these instructions: 1. Turn the ignition to position I. 2. Press and hold in the OK button on the left steering wheel stalk. 3. Continue to hold OK, turn the ignition switch to position II. 4. Wait for
2016 Volvo S60 Service Reminder Indicator (SRI) Reset Read More »
To reset the 2016 Volkswagen Passat service light after an oil change, please follow these instructions: 1. With the ignition off, press and hold the 0,0 SET button and turn on the ignition (do not start the engine). 2. Release the 0,0 SET button to enter reset mode. 3. Press either the OK button on
To reset the 2017 Toyota Rav4 maintenance light after an oil change, please follow these instructions: Monochrome display: 1. Start the engine. 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While pressing the DISP button turn the igniton on (do not start the engine). 4. Continue to press and hold
News and information from the automotive industry
