2014 Silverado 1500

The 2014 Chevrolet Silverado 1500 is offered in a gasoline model.  After performing the oil change the maintenance data will need to be reset.  There are 3 different ways to reset the oil light on this vehicle:

Vehicles equipped with Driver Information Centre (DIC) steering wheel controls:

Steering Wheel Controls

1. Turn the ignition to run (do not start the engine).

2. Use the ↑ or ↓ arrow to highlight the Oil Life Remaining menu.

3. Press the √ button to select this menu.

4. Press and hold the √ until the oil life remaining changes to 100%.

5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Vehicles with DIC controls on the steering wheel:

1. Turn the ignition to run (do not start the engine).

2. Turn the TRIP/RESET stem to scroll the menu and highlight Remaining Oil Life menu.

3. Press and hold the TRIP/RESET button until the oil life remaining changes to 100%.

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Using the Gas Pedal:

1. Turn the ignition to run (do not start the engine)

2. Press the gas pedal 3 times within 5 seconds.

3. If the display shows 100% the system has been reset.

4. Turn the ignition off and then start the engine.

When doing the oil change and topping up fluids you will need to use the following specifications:

4.3L V6

You can cross reference the following Purolator filter numbers for your own application:

Always consult the owner’s manual or manufacturer prior to any service.

*At the time of this posting being published

https://www.oilreset.com

2014 Ford F-150

The 2014 Ford F-150 is the #1 selling vehicle in America 32 years running.  This vehicle is equipped with a gasoline engine. After performing the oil change the maintenance data will need to be reset:

Buttons

1. Turn the ignition on (do not start the engine).

2. Press and release the SETUP button to display “OIL LIFE XXX% HOLD RESET = NEW”.

3. Press and hold the RESET button for two seconds and release to reset the oil life to 100%.

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

When doing the oil change and topping up fluids you will need to use the following specifications:

3.5L V6

You can cross reference the following Purolator filter numbers for your own application or visit https://oilreset.com/tools/filter-look-up/ for further information:

Always consult the owner’s manual or manufacturer prior to any service.

*At the time of this posting being published

https://www.oilreset.com