The 2014 Infiniti Q50 is equipped with the Infiniti Maintenance Reminder System.  After performing the oil change the oil change indicator will need to be reset.  The reset can be performed by following these instructions:

1. Press the Start/Stop button but do not start the engine.

2. From the lower display, scroll to the right to access the secondary menu.  Select the Maintenance Note icon.

3. From the Maintenance Note menu select the Maintenance icon.

4. Select All Parts and then Select the Maintenance item being serviced.  Select Reset or set the service distance for the Maintenance item.

5. Exit the menu and press the Start/Stop button to turn the vehicle off.

6. Start the engine to verify the indicator has been reset.

 

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size	3.7L 6 Cyl.
Motor Oil	5W-30
Oil Capacity w/Filter	5 1/8 US qt. (4.9L)
Power Steering Fluid	Genuine NISSAN PSF or equivalent
Brake Fluid	Genuine NISSAN Super Heavy Duty Brake Fluid
Clutch Fluid	N/A
Engine Coolant	Nissan Long-Life Antifreeze/Coolant (blue)
Automatic Transmission	Genuine NISSAN Matic S ATF
Rear Differential	API GL-5 Synthetic gear oil, Viscosity SAE 75W-90
Transfer Case	Genuine NISSAN Matic J ATF
Front Differential	NISSAN Differential Oil Hypoid Super GL-5 80W-90 or API GL-5, Viscosity SAE 80W-90
Fuel	91 or higher unleaded

You can cross reference the following Purolator filter numbers for your own application:

Engine Size	3.7L 6 Cyl.
Oil Filter	L14612
Air Filter	A15669
Cabin Filter	C25870

Always consult the owner’s manual or manufacturer prior to any service.

*At the time of this posting being published

https://www.oilreset.com

The 2015 Honda Accord is equipped with the Honda Maintenance Minder system. After performing the oil change the oil change indicator will need to be reset. The reset can be performed in 3 different ways depending on the features of the vehicle. Please follow these instructions for the most common way to reset this service reminder:

1. Press the Start/Stop button but do not start the engine.

2. Press the SELECT/RESET knob repeatedly until the engine oil life indicator is displayed.

3. Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance codes blink.

4. Press the SELECT/RESET knob for more than 5 seconds. The maintenance item code(s) will disappear and the engine oil life will reset to 100.

5. Turn the ignition off and then start the engine to verify the indicator has been reset.

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size	2.4L 4 Cyl.	3.5L 6 Cyl.
Motor Oil	0W-20	0W-20
Oil Capacity w/Filter	4.4 US qt. (4.2L)	4.5 US qt. (4.3L)
Brake Fluid	Honda Heavy Duty Brake Fluid DOT 3	Honda Heavy Duty Brake Fluid DOT 3
Clutch Fluid	Honda Heavy Duty Brake Fluid DOT 3	N/A
Engine Coolant	Honda Long-Life Antifreeze/Coolant Type2	Honda Long-Life Antifreeze/Coolant Type2
Automatic Transmission	HCF-2 (CVT)	Honda ATF DW-1
ManualTransmission	Honda Manual Transmission Fluid	N/A
Fuel	87 or higher unleaded	87 or higher unleaded

You can cross reference the following Purolator filter numbers for your own application:

Engine Size	2.4L 4 Cyl.	3.5L 6 Cyl.
Oil Filter	*Dealer Part	*Dealer Part
Air Filter	*Dealer Part	*Dealer Part
Cabin Filter	*Dealer Part	*Dealer Part

Always consult the owner’s manual or manufacturer prior to any service.

*At the time of this posting being published

https://www.oilreset.com