Tired of ads? Remove them as a Premium Member. Read more

2008 Jeep Commander Oil Change Required Light Reset

Daily Oil Light Reset Tip Comments Off on 2008 Jeep Commander Oil Change Required Light Reset
2008 Jeep Commander

2008 Jeep Commander

To reset the 2008 Jeep Commander's Oil Change Required light, follow these instructions:

1. Turn the ignition to run (one position before starting engine).

2. Fully depress the accelerator pedal slowly three times within 10 seconds.

3. Turn the ignition off and then start the engine to verify the indicator has been reset.

 

 

 

2008 Jeep Commander EVIC

2008 Jeep Commander EVIC (electronic vehicle information center)




2014 Kia Cadenza Service Required Light

Daily Oil Light Reset Tip Comments Off on 2014 Kia Cadenza Service Required Light
2014 Kia Cadenza

2014 Kia Cadenza

Follow these instructions to reset the Service Required light on the 2014 Kia Cadenza:

1. Start the engine.

2. If a service is due the display will show "Service required".  To reset this message, locate and press the DOWN button located at the bottom right of the steering wheel for more than 1 second.

Service Required

Service Required

3. The service interval will be reset to the default setting.*The service interval feature has to be turned on and set by the user by accessing the INFORMATION menu.  Press the MODE (rectangle icon) button on the bottom right of the steering wheel to highlight the INFORMATION menu.  Press the DOWN button to access the SERVICE INTERVAL menu and follow the instructions to turn the SERVICE mode on and set the applicable interval.

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Steering Wheel Controls

Steering Wheel Controls




2000 Honda Accord Maintenance Required Light Reset

Daily Oil Light Reset Tip Comments Off on 2000 Honda Accord Maintenance Required Light Reset
2000 Honda Accord Sedan

2000 Honda Accord Sedan

Follow these instructions to reset the Maintenance Required light on the 2000 Honda Accord:

1. Turn off the engine.

2. Press and hold the SELECT/RESET button in the instrument panel.  and turn the ignition switch ON (ii).

3. Hold the button for at least 10 seconds, until the indicator resets.

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Sel/Reset Button

Sel/Reset Button

https://www.oilreset.com




2005 Mercedes CLK Service Light Reset

Daily Oil Light Reset Tip Comments Off on 2005 Mercedes CLK Service Light Reset
2005 CLK320

2005 CLK320

Follow these instructions to reset the service light on the 2005 Mercedes CLK320:

1. Turn the ignition to position 1 (one position before starting the engine).

2. Press the system selection button (located on the lower left of the steering wheel) repeatedly until the kilometer reading is shown in the multi information display.)

3. Press the cluster illumination button (lower left of instrument panel) quickly 3 times.  The battery voltage will be displayed and an audible signal will sound.

4. Turn the ignition to position 2.

5. Press the up or down arrows until the service menu appears.  Press the cluster illumination button once.  The oil menu is now displayed.

6. Use the +/- buttons to the select the oil used.  Use the up or down arrows to confirm.  The display will now show"RESET OIL CONFIRMATION.  PUSH R-BUTTON FOR 3 SECONDS.'

7. Press and hold the cluster illumination button for 3 seconds.  The message "SERVICE CONFIRMED" is displayed.

8. Turn the ignition off and then start the engine to verify the indicator has been reset.

Steering Wheel Controls

Steering Wheel Controls

 

 

 

 

 

 

 

 

 

https://www.oilreset.com




1997 Acura CL Maintenance Light, Oil Light, Oil Life Reset

Daily Oil Light Reset Tip Comments Off on 1997 Acura CL Maintenance Light, Oil Light, Oil Life Reset
1997 Acura CL

1997 Acura CL

Follow these instructions to reset the 1997 Acura CL:

1. Reset the coloured indicator by inserting the key in the slot below the indicator.

https://www.oilreset.com

 




2015 Toyota Camry Maintenance Light Reset & Specs

Automotive, How To Fridays Comments Off on 2015 Toyota Camry Maintenance Light Reset & Specs
2015 Toyota Camry

2015 Toyota Camry

The 2015 Toyota Camry is equipped with the Toyota Maintenance Reminder System.  After performing the oil change the oil change indicator will need to be reset.  The reset can be performed by following these instructions:

1. Turn the ignition to run (one position before starting engine).

2. Ensure Trip metre A reading is shown. Turn ignition off.

Vehicles with smart key system:

3.While pressing the trip meter reset button, press the "ENGINE START STOP" switch to IGNITION ON mode. Continue to press and hold the button until the trip meter displays "000000".

Vehicles without smart key system:

3.While pressing the trip meter reset button, turn the ignition on. Continue to press and hold the button until the trip meter displays "000000".

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Using the multi-information display (if equipped):

Multi Info Display

Multi Info Display

1.  While the engine is running, switch the multi-information display to the “Set- tings” screen.

2.  Select “Maintenance Reset” on the “Settings” screen.

3.  Select “Yes” on the “Maintenance Reset” screen. “Maintenance Reset Complete” will be displayed on the multi-information dis- play when the reset procedure has been completed.

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Using the Multi-Info Display

Using the Multi-Info Display

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size

2.5L 4 Cyl.

3.5L 6 Cyl.

Motor Oil

OW-20

OW-20

Oil Capacity w/Filter

4.6 US qt. (4.4L)

6.4 US qt. (6.1L)

Brake Fluid

DOT 3 or SAE J1703

DOT 3 or SAE J1703

Engine Coolant

Toyota Super Long Life Coolant

Toyota Super Long Life Coolant

Automatic Transmission

Toyota Genuine ATF WS

Toyota Genuine ATF WS

3.5 6 Cyl.

3.5 6 Cyl.

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

2.5L 4 Cyl.

3.5L 6 Cyl.

Oil Filter

L25608

L25608

Air Filter

A35649

A35116

Cabin Filter

C35667

C35667

Always consult the owner’s manual or manufacturer prior to any service.

*At the time of this posting being published

https://www.oilreset.com




2015 Ram 1500 Oil Life Reset & Service Specs

Automotive, How To Fridays Comments Off on 2015 Ram 1500 Oil Life Reset & Service Specs
2014 Ram 1500

2014 Ram 1500

The 2015 Ram 1500 is offered in a gasoline and diesel model.  After performing the oil change the oil change indicator will need to be reset.  To reset the oil change indicator follow these instructions:

 

Steering Wheel Buttons

Steering Wheel Buttons

1. Press the Start/Stop button but do not start the engine.

2. Press and release the DOWN arrow button to scroll downward through the main menu to “Vehicle Info”.

3. Press and release the RIGHT arrow button to access the ”Oil Life” screen.

4. Press and release the DOWN arrow button to select “Reset”, then press and release the Right arrow button to select reset of the Oil Life to 100%.

5. Press and release the Up arrow button to exit the EVIC screen.

6. Turn the ignition off and then start the engine to verify the indicator has been reset.

When doing the oil change and topping up fluids you will need to use the following specifications:

3.6L V6

3.6L V6

Engine Size

3.6L V6

5.7L V8

Motor Oil

5W-20

5W-20

Oil Capacity w/Filter

6 US qt. (5.6L)

7 US qt. (6.6L)

Brake Fluid

Mopar Dot 3

Mopar Dot 3

Engine Coolant

MOPAR Antifreeze/ Coolant

MOPAR Antifreeze/ Coolant

Automatic Transmission (8 Speed)

MOPAR ZF 8&9 Speed ATFTM Automatic Transmission Fluid

MOPAR ZF 8&9 Speed ATFTM Automatic Transmission Fluid

Automatic Transmission (6 Speed)

MOPAR ATF+4

MOPAR ATF+4

Transfer Case

Mopar BW44-44

Mopar BW44-44

Front Differential

MOPAR GL-5 Synthetic Axle Lubricant SAE 75W-85

MOPAR GL-5 Synthetic Axle Lubricant SAE 75W-85

Rear Differential

MOPAR Synthetic Gear Lu- bricant SAE 75W-140.  Limited-Slip Rear Axles require the addition of 5 oz. (148 ml) MOPAR Limited Slip Additive

MOPAR®Synthetic Gear Lu- bricant SAE 75W-140. Limited-Slip Rear Axles require the addition of 5 oz. (148 ml) MOPAR Limited Slip Additive

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

3.6L V6

5.7L V8

Oil Filter

*Dealer Part

*Dealer Part

Air Filter

*Dealer Part

*Dealer Part

Cabin Filter

N/A

N/A

Always consult the owner’s manual or manufacturer prior to any service.

*At the time of this posting being published

https://www.oilreset.com





Remove ads as a Premium Member. Read More