1. Insert ignition key into slot below indicator flag at lower right corner of instrument cluster. 2. Push key in until indicator changes from red to green.
1982 HONDA Prelude Maintenance Light Reset Instructions Read More »
To reset the 2015 Scion tC maintenance data, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Select trip metre A reading by using the trip metre button and then turn the ignition off. 3. While pressing the trip meter reset button, turn the ignition switch to run
1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the
2007 LINCOLN Navigator Maintenance Light Reset Instructions Read More »
To reset the 2015 Kia Sorento service interval, please follow these instructions: 1.Start the engine. 2. If a service is due the display will show “Service required”. To reset this message, press the RESET button (down pointing arrow) on the bottom right of the steering wheel for more than 1 second. 3. The service interval
Land Rover recommends the use of a reset tool.
2000 LAND ROVER Discovery Maintenance Light Reset Instructions Read More »
To reset or set the 2015 Hyundai Santa Fe service interval, please follow these instructions: 1.Start the engine. 2. If a service is due the display will show “Service required”. To reset this message, press the SELECT/RESET button (left pointing arrow) on the bottom right of the steering wheel for more than 1 second. 3.
1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the
2006 LINCOLN Town Car Maintenance Light Reset Instructions Read More »
To reset the 2015 Honda CR-Z maintenance light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Display the engine oil life by repeatedly pressing the UP or DOWN button on the steering wheel. 3. Press and hold the SEL/RESET for more than 10 seconds. The oil life
1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP repeatedly to display OIL LIFE. Press RESET to select OIL LIFE. 3. Press SETUP to scroll through the list and select “SET TO 100%”. Press RESET to select SET TO 100%. 4. Turn the ignition off and then start
2011 LINCOLN MKZ Hybrid Maintenance Light Reset Instructions Read More »
To reset the 2015 Honda Fit maintenance light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Press the SELECT/RESET knob repeatedly until the engine oil life indicator is displayed. 3. Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance
News and information from the automotive industry
