Tired of ads? Remove them as a Premium Member. Read more

Reset the 2016 Subaru WRX Maintenance Light

Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on Reset the 2016 Subaru WRX Maintenance Light
2016 Subaru WRX

2016 Subaru WRX

To reset the 2016 Subaru WRX maintenance light after an oil change, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Using the controsl on the left hand side of the steering wheel. Pull the i/Set button towards you to bring up the selection screen.
3. Use the Up or Down arrow to highlight the MAINTENANCE menu and pull the i/Set switch towards you.
4. Select the maintenance item (i.e. Engine Oil, Oil Filter) and pull the i/SET switch towards you.
5. Change the next service date and interval with the Up and Down arrow and confirm by highlighting SET and pull the i/SET switch towards you. The reset is complete when the screen shows Setting Complete.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Reset only available on models with the multi-information display

2016 Subaru WRX Interior

2016 Subaru WRX Interior

 




2016 Scion iA Maintenance Indicator Reset

Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on 2016 Scion iA Maintenance Indicator Reset
2016 Scion iA

2016 Scion iA

To reset the Scion iA maintenance indicator after an oil change, please follow these instructions:

1. Turn the ignition off.
2. Press and hold the TRIP/RESET button and turn the ignition on.
3. Keep pressing the TRIP/RESET for more than 5 seconds. The master warning light will flash for a few seconds when the reset is complete.
4. Turn the ignition off and start the vehicle to verify the indicator has been reset.

2016 Scion iA Interior

2016 Scion iA Interior




2016 Ram 2500 Oil Life Reset

Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on 2016 Ram 2500 Oil Life Reset
2016 Ram 2500

2016 Ram 2500

To reset the Ram 2500 oil life after an oil change, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Using the steering wheel controls, press the DOWN button repeatedly to scroll to VEHICLE INFO.
3. Press the RIGHT arrow to access VEHICLE INFO and then UP or DOWN to select OIL LIFE.
4. Push and hold the RIGHT arrow button to select RESET.
5. Push and release the RIGHT arrow button to select YES or NO to reset the oil life to 100%. Push and release the UP arrow to exit the screen.
6. Turn the ignition off and then start the engine to veirfy the indicator has been reset.

2016 Ram 2500 Interior

2016 Ram 2500 Interior




2016 Nissan Maxima Maintenance Settings Reset

Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on 2016 Nissan Maxima Maintenance Settings Reset
2016 Nissan Maxima

2016 Nissan Maxima

To reset the 2016 Nissan Maxima maintenance settings after an oil change, please follow these instructions:

1. Start the engine.
2. Use the LEFT or RIGHT arrows on the steering wheel to highlight the SETTINGS menu and press ENTER.
3. Select MAINTENANCE and press ENTER.
4. From the MAINTENANCE menu select OIL and follow the prompts and do the same for the FILTER.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2016 Nissan Maxima Interior

2016 Nissan Maxima Interior




2016 Mitsubishi Outlander Service Light Reset

Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on 2016 Mitsubishi Outlander Service Light Reset
2016 Mitsubishi Outlander

2016 Mitsubishi Outlander

To reset the 2016 Mitsubishi Outlander service light after an oil change, please follow these instructions:

1. The “---” display can be reset while the ignition switch is "OFF". When the display is reset, the time until the next periodic inspection is displayed and "PERIODIC INSPECTION" is no longer displayed when the ignition is switched from "OFF" to "ON".
2. Lightly press the multi-information meter switch until the information screen switches to service reminder display screen.
3. Press and hold the multi-information meter switch for about 2 seconds or more to display the (wrench icon) and make it flash.
4. Lightly press the multi-information meter switch while the icon is flashing to change the display from “---” to "CLEAR". After this, the time until the next periodic inspection will be displayed.
5. Start the engine to verify the indicator has been reset.

2016 Mitsubishi Outlander Interior

2016 Mitsubishi Outlander Interior




2016 Mini Clubman Service Light Reset

Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on 2016 Mini Clubman Service Light Reset
2016 Mini Clubman

2016 Mini Clubman

To reset the 2016 Mini Clubman service light after an oil change, please follow these instructions:

1. Press the start/stop button once (do not start the engine).
2. Press and hold the Trip/Reset button for approximately 10 seconds until the first service job appears in the display. Scroll the service menu by repeatedly pressing the Trip/Reset button.
3. For the desired service item, if a reset is possible ‘Reset possible’ will be displayed. Start the reset by pressing the Trip/Reset button for 3 seconds.
4. Confirm ‘Reset?’ by pressing and holding the Trip/Reset button for 3 seconds.
5. The status of the reset is indicated by a progress bar and ‘Reset in progress’. The reset is confirmed as ‘Reset successful’.
6. Turn the ignition off and start the engine to verify the indicator has been reset.

2016 Mini Clubman

2016 Mini Clubman Interior




2016 Mercedes A-Class Maintenance Light Reset

Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on 2016 Mercedes A-Class Maintenance Light Reset
2016 Mercedes A250

2016 Mercedes A250

To reset the 2016 Mercedes A-Class maintenance light after an oil change, please follow these instructions:

1. Turn the ignition to position 1 (one position before starting the engine).
2. The kilometre/mileage counter must appear in the display. If not displayed, press the down button repeatedly until displayed.
3. Press the left arrow button repeatedly until "trip" is displayed.
4. Press and hold phone button and then within 1 second press and hold down the OK button. Hold for 5 seconds then the workshop menu will be displayed "Vehicle data, Dynamometer Test, Change Brake Lining and ASSYST PLUS".
5. Select ASSYST PLUS and confirm with OK button.
6. Select FULL SERVICE and confirm with OK button.
7. Select CONFIRM SERV and confirm with OK button.
8. Select the oil used "Oil qual. 229.3" or "Oil qual. 229.5" and confirm with OK button.
9. Select YES and confirm with OK button.
10. Select CONFIRMATION and confirm selection by pressing OK button. "Full service carried out" appears in the display.
11. Press the OK button and exit the menu.
12. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Close all doors, windows, hood and trunk when performing reset

2016 Mercedes A-Class Interior

2016 Mercedes A-Class Interior




2016 Mazda CX-3 Maintenance Light Reset

Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on 2016 Mazda CX-3 Maintenance Light Reset
2016 Mazda CX-3

2016 Mazda CX-3

To reset the 2016 Mazda CX-3 maintenance light after an oil change, please follow these instructions:

1. Press and hold the TRIP button with the ignition switched off.
2. Continue to hold the TRIP button and switch the ignition on.
3. After 5 seconds the master warning light will flash for a few seconds to indicate the reset is complete.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Touch screen instructions
1. Turn the ignition to run (one position before starting engine).
2. Select the (A) Applications icon.
3. Select Maintenance to display the maintenance list screen and select Oil Change.
4. Select Reset and follow the prompts.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2016 Mazda CX-3 Interior

2016 Mazda CX-3 Interior




2016 Lincoln MKS Oil Life Reset

Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on 2016 Lincoln MKS Oil Life Reset
2016 Lincoln MKS

2016 Lincoln MKS

To reset the 2016 Lincoln MKS oil life after an oil change, please follow these instructions:

1. Turn the ignition to run (one position before starting engine/ one push of START/STOP button).
2. Using the arrow keypad (left of steering wheel) select SETTINGS.
3. From the SETTINGS menu select VEHICLE.
4. From the VEHICLE menu select OIL LIFE RESET followed by RESET.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2016 Lincoln MKS Interior

2016 Lincoln MKS Interior




2016 Lexus ES 350 Maintenance Light Reset

Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on 2016 Lexus ES 350 Maintenance Light Reset
2016 Lexus ES 350

2016 Lexus ES 350

To reset the 2016 Lexus ES 350 maintenance light after an oil change, please follow these instructions:

1. Start the engine.
2. Using the directional buttons on the right side of the steering wheel scroll LEFT or RIGHT to select to the SETTINGS menu and press ENTER.
3. Use the UP or DOWN button to select SCHEDULED MAINTENANCE and press ENTER.
4. Select YES and press ENTER. A message will be displayed when the reset has been completed.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2016 Lexus ES 350 Interior

2016 Lexus ES 350 Interior





Remove ads as a Premium Member. Read More