Tired of ads? Remove them as a Premium Member. Read more

2008 LEXUS IS – Series Maintenance Light Reset Instructions

Instructions Comments Off on 2008 LEXUS IS – Series Maintenance Light Reset Instructions

1. Turn the ignition to run (push START/STOP button once). Use the trip meter switch to bring up the odometer reading. Turn the ignition off.
2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until the trip meter displays “000000”.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.




2007 LEXUS IS – Series Maintenance Light Reset Instructions

Instructions Comments Off on 2007 LEXUS IS – Series Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Bring up the odometer reading using the trip meter reset knob then the turn ignition off.
3. Hold down the trip meter reset knob while turning the ignition key to the run position (one position before starting engine).
4. Hold down the button for 5 seconds or more. The odometer indicates "000000" and the light goes off.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2006 LEXUS IS – Series Maintenance Light Reset Instructions

Instructions Comments Off on 2006 LEXUS IS – Series Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Bring up the odometer reading using the trip meter reset knob then the turn ignition off.
3. Hold down the trip meter reset knob while turning the ignition key to the run position (one position before starting engine).
4. Hold down the button for 5 seconds or more. The odometer indicates "000000" and the light goes off.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2005 LEXUS IS – Series Maintenance Light Reset Instructions

Instructions Comments Off on 2005 LEXUS IS – Series Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Bring up the odometer reading using the trip meter reset knob then the turn ignition off.
3. Hold down the trip meter reset knob while turning the ignition key to the run position (one position before starting engine).
4. Hold down the button for 5 seconds or more. The odometer indicates "000000" and the light goes off.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2012 LEXUS HS250H Maintenance Light Reset Instructions

Instructions Comments Off on 2012 LEXUS HS250H Maintenance Light Reset Instructions

1. Start the engine/hybrid system.
2. Switch the display to the trip meter “A” when the hybrid system is operating. Turn the engine/hybrid system off.
3. While pressing the trip meter reset button, turn the “POWER” switch to ON mode. (do not start the hybrid system because otherwise the reset mode will be cancelled). Continue to press and hold the button until the trip meter displays “000000” and the multi-information display indicates that the reset is complete.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2011 LEXUS HS250H Maintenance Light Reset Instructions

Instructions Comments Off on 2011 LEXUS HS250H Maintenance Light Reset Instructions

1. Start the engine/hybrid system.
2. Switch the display to the trip meter “A” when the hybrid system is operating. Turn the engine/hybrid system off.
3. While pressing the trip meter reset button, turn the “POWER” switch to ON mode. (do not start the hybrid system because otherwise the reset mode will be cancelled). Continue to press and hold the button until the trip meter displays “000000” and the multi-information display indicates that the reset is complete.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2013 LEXUS GX – Series Maintenance Light Reset Instructions

Instructions Comments Off on 2013 LEXUS GX – Series Maintenance Light Reset Instructions

1. Turn the ignition to run - engine off (push START/STOP button once).
2. Press the Menu switch to change the multi-information display to blank. Turn the engine off.
3. While pressing the ODO/TRIP button, set the “ENGINE START STOP" switch to run - engine off (push START/STOP button once).
4. Keep pushing the “ODO/TRIP” switch for more than 7 seconds. While doing this operation, the master warning light comes on, a warning tone sounds and the "RESETTING OIL MAINTENANCE DATA" message appears to inform you that light has been reset. After 5 seconds, the system reset is completed.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2012 LEXUS GX – Series Maintenance Light Reset Instructions

Instructions Comments Off on 2012 LEXUS GX – Series Maintenance Light Reset Instructions

1. Turn the ignition to run - engine off (push START/STOP button once).
2. Press the Menu switch to change the multi-information display to blank. Turn the engine off.
3. While pressing the ODO/TRIP button, set the “ENGINE START STOP" switch to run - engine off (push START/STOP button once).
4. Keep pushing the “ODO/TRIP” switch for more than 7 seconds. While doing this operation, the master warning light comes on, a warning tone sounds and the "RESETTING OIL MAINTENANCE DATA" message appears to inform you that light has been reset. After 5 seconds, the system reset is completed.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2011 LEXUS GX – Series Maintenance Light Reset Instructions

Instructions Comments Off on 2011 LEXUS GX – Series Maintenance Light Reset Instructions

1. Turn the ignition to run - engine off (push START/STOP button once).
2. Press the Menu switch to change the multi-information display to blank. Turn the engine off.
3. While pressing the ODO/TRIP button, set the “ENGINE START STOP" switch to run - engine off (push START/STOP button once).
4. Keep pushing the “ODO/TRIP” switch for more than 7 seconds. While doing this operation, the master warning light comes on, a warning tone sounds and the "RESETTING OIL MAINTENANCE DATA" message appears to inform you that light has been reset. After 5 seconds, the system reset is completed.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2010 LEXUS GX – Series Maintenance Light Reset Instructions

Instructions Comments Off on 2010 LEXUS GX – Series Maintenance Light Reset Instructions

1. Turn the ignition to run - engine off (push START/STOP button once).
2. Press the Menu switch to change the multi-information display to blank. Turn the engine off.
3. While pressing the ODO/TRIP button, set the “ENGINE START STOP" switch to run - engine off (push START/STOP button once).
4. Keep pushing the “ODO/TRIP” switch for more than 7 seconds. While doing this operation, the master warning light comes on, a warning tone sounds and the "RESETTING OIL MAINTENANCE DATA" message appears to inform you that light has been reset. After 5 seconds, the system reset is completed.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.





Remove ads as a Premium Member. Read More