1. Turn the ignition to position 1.
2. Press the system selection button (3) until the mileage is displayed.
3. Press the reset button R and hold for 3 seconds.
4. The message "DO YOU WANT TO RESET THE SERVICE INTERVAL? CONFIRM WITH R BUTTON" displays.
5. Press the R button again.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1.
2. Press the system selection button (3) until the mileage is displayed.
3. Press the reset button R and hold for 3 seconds.
4. The message "DO YOU WANT TO RESET THE SERVICE INTERVAL? CONFIRM WITH R BUTTON" displays.
5. Press the R button again.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1.
2. Press the system selection button (3) until the mileage is displayed.
3. Press the reset button R and hold for 3 seconds.
4. The message "DO YOU WANT TO RESET THE SERVICE INTERVAL? CONFIRM WITH R BUTTON" displays.
5. Press the R button again.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1.
2. Press the system selection button (3) until the mileage is displayed.
3. Press the reset button R and hold for 3 seconds.
4. The message "DO YOU WANT TO RESET THE SERVICE INTERVAL? CONFIRM WITH R BUTTON" displays.
5. Press the R button again.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn on the ignition (standard display of the control system appears).
2. Press button (UP arrow) or (DOWN arrow) on the multifunction steering wheel until the FSS indicator with (Single Wrench) or (Double Wrench) and the service deadline appears in the multifunction display.
3. Press the reset knob for about 4 seconds. This message appears in the tachometer: "SERVICE INTERVAL...RESET: R-BUTTON 3 SEC."
4. To confirm hold down the reset button until you hear a signal. The service indicator now displays the reset interval.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn on the ignition (standard display of the control system appears).
2. Press button (UP arrow) or (DOWN arrow) on the multifunction steering wheel until the FSS indicator with (Single Wrench) or (Double Wrench) and the service deadline appears in the multifunction display.
3. Press the reset knob for about 4 seconds. This message appears in the tachometer: "DO YOU WANT TO RESET SERVICE INTERVAL? CONFIRM BY USING RESET BUTTON".
4. To confirm hold down the reset button until you hear a signal. The service indicator now displays the reset interval.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Switch ignition on and immediately press knob to left of speedometer twice within 4 seconds.
2. Present status for days or distance is now displayed. Within 10 seconds, turn key in steering wheel lock to position 0.
3. Press and hold button to the left of speedometer, while turning key in steering lock to position 2 again. The present status for days or distance is displayed again. Continue to hold button until you hear a signal (approximately 10 seconds).
4. Release button.
5. Service interval displays the reset interval.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Switch ignition on and immediately press knob to left of speedometer twice within 4 seconds.
2. Present status for days or distance is now displayed. Within 10 seconds, turn key in steering wheel lock to position 0.
3. Press and hold button to the left of speedometer, while turning key in steering lock to position 2 again. The present status for days or distance is displayed again. Continue to hold button until you hear a signal (approximately 10 seconds).
4. Release button.
5. Service interval displays the reset interval.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Switch ignition on and immediately press knob to left of speedometer twice within 4 seconds.
2. Present status for days or distance is now displayed. Within 10 seconds, turn key in steering wheel lock to position 0.
3. Press and hold button to the left of speedometer, while turning key in steering lock to position 2 again. The present status for days or distance is displayed again. Continue to hold button until you hear a signal (approximately 10 seconds).
4. Release button.
5. Service interval displays the reset interval.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to position 1 (one position before starting the engine).
2. Within 4 seconds press button (1) left of speedometer twice.
3. The present status for days or distance displays, within 10 seconds turn key in steering lock to position O.
4. Press and hold button (1), while turning key in steering lock to position 2 again. The present status for days or distance displays once more.
5. Continue to hold button (1) for approximately 10 seconds until a signal sounds and the display shows 10 000 mils or 15 000km. Release button (1).
6. Turn the ignition off and then start the engine to verify the indicator has been reset.