The 2015 Toyota Camry is equipped with the Toyota Maintenance Reminder System.  After performing the oil change the oil change indicator will need to be reset.  The reset can be performed by following these instructions:

1. Turn the ignition to run (one position before starting engine).

2. Ensure Trip metre A reading is shown. Turn ignition off.

Vehicles with smart key system:

3.While pressing the trip meter reset button, press the “ENGINE START STOP” switch to IGNITION ON mode. Continue to press and hold the button until the trip meter displays “000000”.

Vehicles without smart key system:

3.While pressing the trip meter reset button, turn the ignition on. Continue to press and hold the button until the trip meter displays “000000”.

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Using the multi-information display (if equipped):

1.  While the engine is running, switch the multi-information display to the “Set- tings” screen.

2.  Select “Maintenance Reset” on the “Settings” screen.

3.  Select “Yes” on the “Maintenance Reset” screen. “Maintenance Reset Complete” will be displayed on the multi-information dis- play when the reset procedure has been completed.

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

When doing the oil change and topping up fluids you will need to use the following specifications:

You can cross reference the following Purolator filter numbers for your own application:

Always consult the owner’s manual or manufacturer prior to any service.

*At the time of this posting being published

http://www.oilreset.com