2014 Toyota Venza

The 2014 Toyota Venza maintenance required light comes on when the vehicle is due or past due for an oil change service.  After performing an oil change service, follow these instructions to reset the maintenance required light:
1. Start the engine and bring up the trip meter A reading.
Vehicles with smart key system:
2. Turn the “ENGINE START STOP” switch off.
3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine).
4. Continue to press and hold the button until the trip meter displays "000000".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Vehicles without smart key system:
2. Turn the ignition switch off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2014 Toyota Venza Maintenance Required

Filter Specification

The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:

Oil Specification

The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.

2014 Toyota Tacoma

The 2014 Toyota Tacoma maintenance required light comes on when the vehicle is due or past due for an oil change service.  After performing the oil change, follow these instructions to reset the change oil light:

2014 Toyota Tacoma Maintenance Required

1. Start the engine.
2. Ensure trip meter A reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Filter Specification

The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:

Oil Specification

The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.

2014 Toyota Sienna

The 2014 Toyota Sienna maintenance light comes on when the vehicle is due or past due for an oil change service.  After completing the oil change, follow these instructions to reset the maintenance required light:

Vehicles without smart key system
1. Turn the ignition to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Vehicles with smart key system
1. Press the "ENGINE START STOP" switch once (do not start engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine).
4. Continue to press and hold the button until the trip meter displays "000000" or if equipped the multi information display shows "COMPLETE".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2014 Toyota Sienna Maintenance Required Light

Filter Specification

The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:

Oil Specification

The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.

The 2014 Toyota Sequoia maintenance required light comes on when the vehicle is due or coming due for an oil change service.  To reset the maintenance required light, follow these instructions depending on the instrument cluster configuration:

1. Turn the ignition to run (one position before starting the engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).

Without multi-information display
4. Continue to press and hold the button until the trip meter displays "000000".
With multi-information display
4. Continue to press and hold the button until “MAINT REQD RESET MODE COMPLETE" appears on the multi-information display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2014 Toyota Sequoia Maintenance Required Light

Filter Specification

The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:

Oil Specification

The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.

2014 Toyota RAV4

The 2014 Toyota RAV4 maintenance required light comes on when the vehicle is coming due or past due for an oil change service.  To reset the maintenance required light, follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While pressing the DISP button turn the ignition on (do not start the engine).
4. Continue to press and hold the button until the trip meter displays "000000".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2014 Toyota RAV4 Maintenance Required

Filter Specification

The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:

Oil Specification

The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.

2014 Toyota Prius C

1. Press the "ENGINE START STOP" switch once (do not start engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. Press the "ENGINE START STOP" switch once (do not start engine). The multi-information screen will be displayed for a few seconds. While it is being displayed press the TRIP switch 3 times and hold it on the third time.
4. Continue to press and hold the button until the trip meter displays "000000".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Filter Specification

The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:

Oil Specification

The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.

Toyota Prius

The 2014 Toyota Prius V maintenance required soon light comes on when the vehicle is coming due or past due an oil change service.  Once the oil change. is complete, the 2014 Toyota Prius V maintenance required soon light can be reset by following these instructions:

1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While holding the MPH or KM/H button turn the ignition on (do not start engine).
4. Continue to press and hold the button until the trip meter displays "000000" and the display indicates the reset is complete.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Filter Specification

The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:

Oil Specification

The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.

 Toyota Prius PHV

The 2014 Toyota Prius PHV maintenance required soon light comes on when the vehicle is coming due or past due for an oil change service.  After completing the oil change, the 2014 Toyota Prius PHV maintenance required soon light can be reset following these instructions:

1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While holding the MPH or KM/H button turn the ignition on (do not start engine).
4. Continue to press and hold the button until the trip meter displays "000000" and the display indicates the reset is complete.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

 Toyota Prius PHV Maintenance Required

Filter Specification

The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:

Oil Specification

The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.

2014 Toyota Matrix

The 2014 Toyota Matrix maintenance required light comes on when the vehicle is coming due or past due for an oil change service.  To reset the 2014 Toyota Matrix maintenance required light, follow these instructions:

1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine) or turn ignition to run (one position before starting engine).
4. Continue to press and hold the button until the trip meter displays "000000".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

 Maintenance Required

Filter Specification

The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:

Oil Specification

The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.

Toyota Land Cruiser 

The 2014 Toyota Land Cruiser maintenance required soon light comes on when the vehicle is coming due or past due for an oil change service.  To reset the 2014 Toyota Land Cruiser maintenance required soon light, follow these instructions:

1. Press the "ENGINE START STOP" switch once (do not start engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.

 Maintenance Required Soon

3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine).
Continue to press and hold the button until "COMPLETE" appears on the multi-information display.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Filter Specification

The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:

Oil Specification

The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.