Tired of ads? Remove them as a Premium Member. Read more

2015 Subaru Impreza Maintenance Light Reset

Automotive, Daily Oil Light Reset Tip, How To Fridays Comments Off on 2015 Subaru Impreza Maintenance Light Reset
2015 Subaru Impreza

2015 Subaru Impreza

To reset the 2015 Subaru Impreza, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Using the controsl on the left hand side of the steering wheel. Pull the i/Set button towards you to bring up the selection screen.
3. Use the Up or Down arrow to highlight the MAINTENANCE menu and pull the i/Set switch towards you.
4. Select the maintenance item (i.e. Engine Oil, Oil Filter) and pull the i/SET switch towards you.
5. Change the next service date and interval with the Up and Down arrow and confirm by highlighting SET and pull the i/SET switch towards you. The reset is complete when the screen shows Setting Complete.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

*Reset only available on models with the multi-information display

Steering Wheel Controls

Steering Wheel Controls




2015 MAZDA3 Maintenance Monitor Reset

Automotive, Daily Oil Light Reset Tip, How To Fridays Comments Off on 2015 MAZDA3 Maintenance Monitor Reset
2015 MAZDA3

2015 MAZDA3

To reset the 2015 MAZDA 3 maintenance monitor, please follow these instructions:

 

TRIP button reset:

1. Press and hold the TRIP button with the ignition switched off.

Trip Button

Trip Button

2. Continue to hold the TRIP button and switch the ignition on.

3. After 5 seconds the master warning light will flash for a few seconds to indicate the reset is complete.

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

 

Touch Screen:

1. Turn the ignition to run (one position before starting the engine).

2. Select the Applications (A) icon.

3. Select Maintenance to display the maintenance list screen and select Oil Change.

4. Select Reset and follow the prompts.

5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Home Screen

Home Screen

 

 

 




2015 Volkswagen (VW) Jetta Service Interval Reset & Specs

Daily Oil Light Reset Tip, How To Fridays Comments Off on 2015 Volkswagen (VW) Jetta Service Interval Reset & Specs
2015 VW Jetta

2015 VW Jetta

The 2015 Vokswagen (VW) Jetta is equipped with the VW Service Interval System. After performing the oil change, the service internal will need to be reset. The reset can be performed by following these instructions:

2015 VW Jetta Ignition Switch

2015 VW Jetta Ignition Switch

 

 

 

 

 

 

2015 VW START/STOP Switch

2015 VW START/STOP Switch

 

2015 VW Instrument Cluster

2015 VW Instrument Cluster

Instrument Cluster (Basic Display):

 

1. Turn the ignition off.

2. Press and hold the 0,0 button (located to the right of the instrument cluster).

3. Turn the igntion on (do not start the engine) and release the 0,0 button.  Briefly press the double square button (located to the left of the instrument cluster).

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Instrument Cluster (Premium Display):

&nbsp:

1. Turn the ignition off.

2. Press and hold the 0,0 button (located to the right of the instrument cluster).

3. Turn the igntion on (do not start the engine) and release the 0,0 button.

4. A confirmation appears in the display.  confirm request with the OK/RESET on the wiper lever or OK on the multi-function steering wheel.

5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Rocker Switch:

2015 VW Jetta Rocker Switch

2015 VW Jetta Rocker Switch

1. Start the engine

2. Use the rocker switch on the windshield wiper lever to select "Settings" and confirm with button underneath windshield wiper lever.

3. Select the "Settings" menu followed by the "Service" submenu.  Select "Reset" and confirm.

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

 

Multi-Function Steering Wheel:

2015 VW Jetta Multi-Function Steering Wheel

2015 VW Jetta Multi-Function Steering Wheel

1. Start the engine.

2. Use the buttons on the multi function steering wheel.

3. Select the "Settings" menu followed by the "Service" submenu.  Select "Reset" and confirm.

4. Turn the ignition off and then start the engine to verify the indicator has been reset.*vehicles equipped with a navigation system can also access the reset menu from the SETTINGS button.

5. Turn the ignition off and then start the engine to verify the indicator has been reset.

 

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size

1.8L 4 Cyl. (Gas)

2.0L 4 Cyl. (Gas)

1.8L 4 Cyl. (Diesel)

Motor Oil

5W40 or 5W30 SyntheticVW 502 00

VW 503 00

VW 504 00

5W40 or 5W30 SyntheticVW 502 00

VW 503 00

VW 504 00

5W40 or 5W30 SyntheticVW 507 00

Oil Capacity w/Filter

5.7 US qt. (5.5L)

3.8 US qt. (3.6L)

5.8 US qt. (5.5L)

Brake/Clutch Fluid

VW Standard 501 14

VW Standard 501 14

VW Standard 501 14

Engine Coolant

VW Coolant G13 (TL-VW 774J)

VW Coolant G13 (TL-VW 774J)

VW Coolant G13 (TL-VW 774J)

Manual Transmission

VW Manual Transmission Fluid

VW Manual Transmission Fluid

VW Manual Transmission Fluid

Automatic Transmission

VW Automatic Transmission Fluid

VW Automatic Transmission Fluid

VW Automatic Transmission Fluid

 

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

1.8L 4 Cyl. (Gas)

2.0L 4 Cyl. (Gas)

1.8L 4 Cyl. (Diesel)

Oil Filter

*Dealer Part

*Dealer Part

*Dealer Part

Air Filter

*Dealer Part

*Dealer Part

*Dealer Part

Cabin Filter

*Dealer Part

*Dealer Part

*Dealer Part

 

Always consult the owner’s manual or manufacturer prior to any service.

*At the time of this posting being published

https://www.oilreset.com




2015 Honda Civic Oil Change Light Reset & Specs

Daily Oil Light Reset Tip, How To Fridays Comments Off on 2015 Honda Civic Oil Change Light Reset & Specs
2015 Honda Civic Sedan

2015 Honda Civic Sedan

The 2015 Honda Civic is equipped with the Honda Maintenance Data System. After performing the oil change, the oil change indicator will need to be reset. The reset can be performed by following these instructions:

 

Intelligent Multi-Information Display

Intelligent Multi-Information Display

i-MID (Intelligent Multi-Information Display):

  1. Press the Start/Stop button once (do not start the engine).

  2. Press the Menu button to go to the Vehicle Menu screen.

  3. Select Vehicle Information with the (+) button, then press the SOURCE button.

  4. Press the SOURCE button again to go to the Maintenance Info screen.  The engine oil life reset mode will appear on the multi information display.

  5. Select Yes with the (–) button, the press the SOURCE button.  The engine oil life display returns 100%.

  6. Turn the ignition off and then start the engine to verify the indicator has been reset.

Non i-MID Vehicles:

2015 Honda Civic Non i-MID

2015 Honda Civic Non i-MID

  1. Turn the ignition to ON (II) (do not start the engine).

  2. Display the engine oil life by repeatedly pressing the SELECT/RESET button.

  3. Press and hold the SELECT/RESET button for 10 seconds or more. The maintenance item codes and the engine oil life indicator blink.

  4. Press the SELECT/RESET button for 5 seconds or more. The displayed maintenance items disappear the engine oil life indicator shows 100%.

  5. Turn the ignition off and then start the engine verify the indicator has been reset.

2015 Honda Civic START/STOP

2015 Honda Civic START/STOP

 

2015 Honda Civic Ignition Switch

2015 Honda Civic Ignition Switch

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size

1.8L 4 Cyl.

2.4L 4 Cyl.

Motor Oil

0W-20

OW-20

Oil Capacity w/Filter

3.9 US qt. (3.7L)

4.4 US qt. (4.2L)

Brake Fluid

Honda Heavy Duty Brake Fluid DOT 3

Honda Heavy Duty Brake Fluid DOT 3

Clutch Fluid

Honda Heavy Duty Brake Fluid DOT 3

Honda Heavy Duty Brake Fluid DOT 3

Engine Coolant

Honda Long-Life Antifreeze/Coolant Type 2

Honda Long-Life Antifreeze/Coolant Type 2

Manual Transmission

Honda Manual Transmission Fluid

Honda Manual Transmission Fluid

CVT

HCF-2

 

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

1.8L 4 Cyl.

2.4L 4 Cyl.

Oil Filter

L14610

L14610

Air Filter

A26171

A26197

Cabin Filter

C35519

C35519

 

Always consult the owner’s manual or manufacturer prior to any service.

*At the time of this posting being published

https://www.oilreset.com




2015 Toyota Corolla Oil Change Light Reset & Specifications

Automotive, How To Fridays Comments Off on 2015 Toyota Corolla Oil Change Light Reset & Specifications
2015 Toyota Corlla

2015 Toyota Corlla

The 2015 Toyota Corolla is equipped with the Toyota Maintenance Data System. After performing the oil change, the oil change indicator will need to be reset. The reset can be performed by following these instructions:

1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine).

2. Ensure Trip Metre A reading is shown (use the Trip button for vehicles with a Multi-Information display or DISP for vehicles with a drive monitor display). Turn the ignition off.

3. While pressing the Trip Meter reset button (Multi-Information Display) or while pressing the DISP button (for vehicles with a drive monitor display), press the "ENGINE START STOP" switch once (do not start engine) or turn the key in the ignition to run (one position before starting engine).

4. Continue to press and hold the button until the trip meter displays "000000".

5 Turn the ignition off and then start the engine to verify the indicator has been reset.

Use the DISP button for vehicles not equipped with the Multi-Information Display
Use the DISP button for vehicles not equipped with the Multi-Information Display
Non Multi-Information Display
Non Multi-Information Display

When doing the oil change and topping up fluids you will need to use the following specifications:

Use the Trip button for vehicles equipped with the Multi-Information Display
Use the Trip button for vehicles equipped with the Multi-Information Display
Multi-Information Display
Multi-Information Display

Engine Size

1.8L 4 Cyl.

Motor Oil

OW-20

Oil Capacity w/Filter

4.4 US qt. (4.2L)

Brake/Clutch Fluid

SAE J1703 or FMVSS No.116 DOT 3

Engine Coolant

Toyota Super Long Life Coolant

Manual Transmission

TOYOTA Genuine Manual Transmission Gear Oil LV

CVT

Toyota Genuine CVTF FE

Automatic Transmission

Toyota Genuine ATF WS

You can cross reference the following Purolator filter numbers for your own application:

4 Cyl. 1.8L
4 Cyl. 1.8L

Engine Size

1.8L 4 Cyl.

Oil Filter

L16311

Air Filter

A25655

Cabin Filter

*Dealer Part

Always consult the owner’s manual or manufacturer prior to any service.

*At the time of this posting being published

https://www.oilreset.com




2015 Toyota Camry Maintenance Light Reset & Specs

Automotive, How To Fridays Comments Off on 2015 Toyota Camry Maintenance Light Reset & Specs
2015 Toyota Camry

2015 Toyota Camry

The 2015 Toyota Camry is equipped with the Toyota Maintenance Reminder System.  After performing the oil change the oil change indicator will need to be reset.  The reset can be performed by following these instructions:

1. Turn the ignition to run (one position before starting engine).

2. Ensure Trip metre A reading is shown. Turn ignition off.

Vehicles with smart key system:

3.While pressing the trip meter reset button, press the "ENGINE START STOP" switch to IGNITION ON mode. Continue to press and hold the button until the trip meter displays "000000".

Vehicles without smart key system:

3.While pressing the trip meter reset button, turn the ignition on. Continue to press and hold the button until the trip meter displays "000000".

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Using the multi-information display (if equipped):

Multi Info Display

Multi Info Display

1.  While the engine is running, switch the multi-information display to the “Set- tings” screen.

2.  Select “Maintenance Reset” on the “Settings” screen.

3.  Select “Yes” on the “Maintenance Reset” screen. “Maintenance Reset Complete” will be displayed on the multi-information dis- play when the reset procedure has been completed.

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Using the Multi-Info Display

Using the Multi-Info Display

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size

2.5L 4 Cyl.

3.5L 6 Cyl.

Motor Oil

OW-20

OW-20

Oil Capacity w/Filter

4.6 US qt. (4.4L)

6.4 US qt. (6.1L)

Brake Fluid

DOT 3 or SAE J1703

DOT 3 or SAE J1703

Engine Coolant

Toyota Super Long Life Coolant

Toyota Super Long Life Coolant

Automatic Transmission

Toyota Genuine ATF WS

Toyota Genuine ATF WS

3.5 6 Cyl.

3.5 6 Cyl.

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

2.5L 4 Cyl.

3.5L 6 Cyl.

Oil Filter

L25608

L25608

Air Filter

A35649

A35116

Cabin Filter

C35667

C35667

Always consult the owner’s manual or manufacturer prior to any service.

*At the time of this posting being published

https://www.oilreset.com




2015 Ram 1500 Oil Life Reset & Service Specs

Automotive, How To Fridays Comments Off on 2015 Ram 1500 Oil Life Reset & Service Specs
2014 Ram 1500

2014 Ram 1500

The 2015 Ram 1500 is offered in a gasoline and diesel model.  After performing the oil change the oil change indicator will need to be reset.  To reset the oil change indicator follow these instructions:

 

Steering Wheel Buttons

Steering Wheel Buttons

1. Press the Start/Stop button but do not start the engine.

2. Press and release the DOWN arrow button to scroll downward through the main menu to “Vehicle Info”.

3. Press and release the RIGHT arrow button to access the ”Oil Life” screen.

4. Press and release the DOWN arrow button to select “Reset”, then press and release the Right arrow button to select reset of the Oil Life to 100%.

5. Press and release the Up arrow button to exit the EVIC screen.

6. Turn the ignition off and then start the engine to verify the indicator has been reset.

When doing the oil change and topping up fluids you will need to use the following specifications:

3.6L V6

3.6L V6

Engine Size

3.6L V6

5.7L V8

Motor Oil

5W-20

5W-20

Oil Capacity w/Filter

6 US qt. (5.6L)

7 US qt. (6.6L)

Brake Fluid

Mopar Dot 3

Mopar Dot 3

Engine Coolant

MOPAR Antifreeze/ Coolant

MOPAR Antifreeze/ Coolant

Automatic Transmission (8 Speed)

MOPAR ZF 8&9 Speed ATFTM Automatic Transmission Fluid

MOPAR ZF 8&9 Speed ATFTM Automatic Transmission Fluid

Automatic Transmission (6 Speed)

MOPAR ATF+4

MOPAR ATF+4

Transfer Case

Mopar BW44-44

Mopar BW44-44

Front Differential

MOPAR GL-5 Synthetic Axle Lubricant SAE 75W-85

MOPAR GL-5 Synthetic Axle Lubricant SAE 75W-85

Rear Differential

MOPAR Synthetic Gear Lu- bricant SAE 75W-140.  Limited-Slip Rear Axles require the addition of 5 oz. (148 ml) MOPAR Limited Slip Additive

MOPAR®Synthetic Gear Lu- bricant SAE 75W-140. Limited-Slip Rear Axles require the addition of 5 oz. (148 ml) MOPAR Limited Slip Additive

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

3.6L V6

5.7L V8

Oil Filter

*Dealer Part

*Dealer Part

Air Filter

*Dealer Part

*Dealer Part

Cabin Filter

N/A

N/A

Always consult the owner’s manual or manufacturer prior to any service.

*At the time of this posting being published

https://www.oilreset.com




2014 Infiniti Q50 Maintenance Light Reset & Specs

Automotive, How To Fridays Comments Off on 2014 Infiniti Q50 Maintenance Light Reset & Specs

Q50 ExteriorThe 2014 Infiniti Q50 is equipped with the Infiniti Maintenance Reminder System.  After performing the oil change the oil change indicator will need to be reset.  The reset can be performed by following these instructions:

1. Press the Start/Stop button but do not start the engine.

2. From the lower display, scroll to the right to access the secondary menu.  Select the Maintenance Note icon.

3. From the Maintenance Note menu select the Maintenance icon.

4. Select All Parts and then Select the Maintenance item being serviced.  Select Reset or set the service distance for the Maintenance item.

5. Exit the menu and press the Start/Stop button to turn the vehicle off.

6. Start the engine to verify the indicator has been reset.

First Menu

Second Menu Screen

Maintenance 

Maintenance Screen

Maintenance Screen

Service Items

Service Items

 

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size

3.7L 6 Cyl.

Motor Oil

5W-30

Oil Capacity w/Filter

5 1/8 US qt. (4.9L)

Power Steering Fluid

Genuine NISSAN PSF or equivalent

Brake Fluid

Genuine NISSAN Super Heavy Duty Brake Fluid

Clutch Fluid

N/A

Engine Coolant

Nissan Long-Life Antifreeze/Coolant (blue)

Automatic Transmission

Genuine NISSAN Matic S ATF

Rear Differential

API GL-5 Synthetic gear oil, Viscosity SAE 75W-90

Transfer Case

Genuine NISSAN Matic J ATF

Front Differential

NISSAN Differential Oil Hypoid Super GL-5 80W-90 or API GL-5, Viscosity SAE 80W-90

Fuel

91 or higher unleaded

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

3.7L 6 Cyl.

Oil Filter

L14612

Air Filter

A15669

Cabin Filter

C25870

Always consult the owner’s manual or manufacturer prior to any service.

*At the time of this posting being published

https://www.oilreset.com




2015 Honda Accord Maintenance Light Reset & Specs

Automotive, How To Fridays Comments Off on 2015 Honda Accord Maintenance Light Reset & Specs
2015 Honda Accord

2015 Honda Accord

The 2015 Honda Accord is equipped with the Honda Maintenance Minder system. After performing the oil change the oil change indicator will need to be reset. The reset can be performed in 3 different ways depending on the features of the vehicle. Please follow these instructions for the most common way to reset this service reminder:

1. Press the Start/Stop button but do not start the engine.

2. Press the SELECT/RESET knob repeatedly until the engine oil life indicator is displayed.

3. Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance codes blink.

4. Press the SELECT/RESET knob for more than 5 seconds. The maintenance item code(s) will disappear and the engine oil life will reset to 100.

5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Instrument Cluster

Instrument Cluster

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine Size

2.4L 4 Cyl.

3.5L 6 Cyl.

Motor Oil

0W-20

0W-20

Oil Capacity w/Filter

4.4 US qt. (4.2L)

4.5 US qt. (4.3L)

Brake Fluid

Honda Heavy Duty Brake Fluid DOT 3

Honda Heavy Duty Brake Fluid DOT 3

Clutch Fluid

Honda Heavy Duty Brake Fluid DOT 3

N/A

Engine Coolant

Honda Long-Life Antifreeze/Coolant Type2

Honda Long-Life Antifreeze/Coolant Type2

Automatic Transmission

HCF-2 (CVT)

Honda ATF DW-1

ManualTransmission

Honda Manual Transmission Fluid

N/A

Fuel

87 or higher unleaded

87 or higher unleaded

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

2.4L 4 Cyl.

3.5L 6 Cyl.

Oil Filter

*Dealer Part

*Dealer Part

Air Filter

*Dealer Part

*Dealer Part

Cabin Filter

*Dealer Part

*Dealer Part

3.5L V6

3.5L V6

Always consult the owner’s manual or manufacturer prior to any service.

*At the time of this posting being published

https://www.oilreset.com




2014 Toyota Camry Maintenance Light Reset & Specs

Automotive, How To Fridays Comments Off on 2014 Toyota Camry Maintenance Light Reset & Specs
2014 Toyota Camry

2014 Toyota Camry

The 2014 Toyota Camry is offered in a gasoline model.  After performing the oil change the maintenance data will need to be reset.  To reset the data follow these instructions:

Trip Button

Trip Button

1. Turn the ignition to run (one position before starting engine).

2. Ensure Trip metre A reading is shown. Turn ignition off.

Vehicles with smart key system:

3.While pressing the trip meter reset button, press the "ENGINE START STOP" switch to IGNITION ON mode. Continue to press and hold the button until the trip meter displays "000000".

Vehicles without smart key system:

3.While pressing the trip meter reset button, turn the ignition on. Continue to press and hold the button until the trip meter displays "000000".

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

When doing the oil change and topping up fluids you will need to use the following specifications:

Engine

2.5L 4 Cyl.

Engine Size

2.5L 4 Cyl.

3.5L V6

Motor Oil w/Filter

OW-20

0W-20

Oil Capacity w/Filter

4.6 US qt. (4.4L)

6.4 US qt. (6.1L)

Brake Fluid

DOT 3

DOT 3

Engine Coolant

Toyota Super Long Life

Toyota Super Long Life

Automatic Transmission

Toyota Genuine ATF WS

Toyota Genuine ATF WS

You can cross reference the following Purolator filter numbers for your own application:

Engine Size

2.5L 4 Cyl.

3.5L V6

Oil Filter

L25608

L25608

Air Filter

A35649

A35649

Cabin Filter

C35667

C35667

Always consult the owner’s manual or manufacturer prior to any service.

*At the time of this posting being published

https://www.oilreset.com





Remove ads as a Premium Member. Read More