The 2014 Toyota Venza maintenance required light comes on when the vehicle is due or past due for an oil change service. After performing an oil change service, follow these instructions to reset the maintenance required light: 1. Start the engine and bring up the trip meter A reading. Vehicles with smart key system: 2. Turn the “ENGINE START STOP” switch off. 3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine). 4. Continue to press and hold the button until the trip meter displays "000000". 5. Turn the ignition off and then start the engine to verify the indicator has been reset. Vehicles without smart key system: 2. Turn the ignition switch off. 3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine). 4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing. 5. Turn the ignition off and then start the engine to verify the indicator has been reset.
2014 Toyota Venza Maintenance Required
Filter Specification
The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:
Filter Type
Part # (2.7L)
Part # (3.5L)
Oil Filter
9972
9972
Air Filter
10171
10169
Cabin Filter
10285
10285
Oil Specification
The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.
2014 Toyota Venza Oil Quantity2014 Toyota Venza Oil Specs
The 2014 Toyota Tacoma maintenance required light comes on when the vehicle is due or past due for an oil change service. After performing the oil change, follow these instructions to reset the change oil light:
2014 Toyota Tacoma Maintenance Required
1. Start the engine. 2. Ensure trip meter A reading is shown. Turn ignition off. 3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine). 4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing. 5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Filter Specification
The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:
Filter Type
Part # (2.7L)
Part # (4.0L)
Oil Filter
3614
3614
Air Filter
10163
9683
Cabin Filter
10374
10374
Oil Specification
The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.
The 2014 Toyota Sienna maintenance light comes on when the vehicle is due or past due for an oil change service. After completing the oil change, follow these instructions to reset the maintenance required light:
Vehicles without smart key system 1. Turn the ignition to run (one position before starting engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine). 4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing. 5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Vehicles with smart key system 1. Press the "ENGINE START STOP" switch once (do not start engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine). 4. Continue to press and hold the button until the trip meter displays "000000" or if equipped the multi information display shows "COMPLETE". 5. Turn the ignition off and then start the engine to verify the indicator has been reset.
2014 Toyota Sienna Maintenance Required Light
Filter Specification
The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:
Filter Type
Part # (3.5L)
Oil Filter
9972
Air Filter
10755
Cabin Filter
10285
Oil Specification
The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.
The 2014 Toyota Sequoia maintenance required light comes on when the vehicle is due or coming due for an oil change service. To reset the maintenance required light, follow these instructions depending on the instrument cluster configuration:
1. Turn the ignition to run (one position before starting the engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
Without multi-information display 4. Continue to press and hold the button until the trip meter displays "000000". With multi-information display 4. Continue to press and hold the button until “MAINT REQD RESET MODE COMPLETE" appears on the multi-information display. 5. Turn the ignition off and then start the engine to verify the indicator has been reset.
2014 Toyota Sequoia Maintenance Required Light
Filter Specification
The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:
Filter Type
Part # (5.7L)
Oil Filter
10295
Air Filter
10343
Cabin Filter
10285
*For informational purposes
Oil Specification
The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.
The 2014 Toyota RAV4 maintenance required light comes on when the vehicle is coming due or past due for an oil change service. To reset the maintenance required light, follow these instructions:
1. Turn the ignition to run (one position before starting engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While pressing the DISP button turn the ignition on (do not start the engine). 4. Continue to press and hold the button until the trip meter displays "000000". 5. Turn the ignition off and then start the engine to verify the indicator has been reset.
2014 Toyota RAV4 Maintenance Required
Filter Specification
The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:
Filter Type
Part # (2.5L)
Oil Filter
9972
Air Filter
10677
Cabin Filter
10285
*Verify specs before servicing vehicle
Oil Specification
The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.
1. Press the "ENGINE START STOP" switch once (do not start engine). 2. Ensure odometer reading is shown. Turn ignition off. 3. Press the "ENGINE START STOP" switch once (do not start engine). The multi-information screen will be displayed for a few seconds. While it is being displayed press the TRIP switch 3 times and hold it on the third time. 4. Continue to press and hold the button until the trip meter displays "000000". 5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Maintenance Required Soon
Filter Specification
The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:
Filter Type
Part # (1.5L)
Oil Filter
4967
Air Filter
11426
Cabin Filter
10285
Oil Specification
The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.
The 2014 Toyota Prius V maintenance required soon light comes on when the vehicle is coming due or past due an oil change service. Once the oil change. is complete, the 2014 Toyota Prius V maintenance required soon light can be reset by following these instructions:
1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While holding the MPH or KM/H button turn the ignition on (do not start engine). 4. Continue to press and hold the button until the trip meter displays "000000" and the display indicates the reset is complete. 5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Maintenance Required Data
Filter Specification
The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:
Filter Type
Part # (1.8L)
Oil Filter
10358
Air Filter
10741
Cabin Filter
10285
Oil Specification
The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.
The 2014 Toyota Prius PHV maintenance required soon light comes on when the vehicle is coming due or past due for an oil change service. After completing the oil change, the 2014 Toyota Prius PHV maintenance required soon light can be reset following these instructions:
1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While holding the MPH or KM/H button turn the ignition on (do not start engine). 4. Continue to press and hold the button until the trip meter displays "000000" and the display indicates the reset is complete. 5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Toyota Prius PHV Maintenance Required
Filter Specification
The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:
Filter Type
Part # (1.8L)
Oil Filter
10358
Air Filter
10741
Cabin Filter
10285
Oil Specification
The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.
The 2014 Toyota Matrix maintenance required light comes on when the vehicle is coming due or past due for an oil change service. To reset the 2014 Toyota Matrix maintenance required light, follow these instructions:
1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine) or turn ignition to run (one position before starting engine). 4. Continue to press and hold the button until the trip meter displays "000000". 5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Maintenance Required
Filter Specification
The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:
Filter Type
Part # (1.8L)
Oil Filter
10358
Air Filter
10190
Cabin Filter
10285
Oil Specification
The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.
The 2014 Toyota Land Cruiser maintenance required soon light comes on when the vehicle is coming due or past due for an oil change service. To reset the 2014 Toyota Land Cruiser maintenance required soon light, follow these instructions:
1. Press the "ENGINE START STOP" switch once (do not start engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off.
Maintenance Required Soon
3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine). Continue to press and hold the button until "COMPLETE" appears on the multi-information display. 4. Turn the ignition off and then start the engine to verify the indicator has been reset.
Maintenance Data Reset
Filter Specification
The oil change on this vehicle is fairly straightforward with the oil pan and oil filter fairly accessible. The following FRAM filters are used on this vehicle:
Filter Type
Part # (5.7L)
Oil Filter
Air Filter
Cabin Filter
Oil Specification
The oil specs for this vehicle have been taken directly from the owner's manual. More details around oil, torque, tires, and specifications can be referenced in the owner's manual.