The 2014 Mazda6 is offered in a gasoline model. After performing the oil change the maintenance data will need to be reset. Follow these steps to reset this light:
Turn the ignition to run (do not start the engine).
Press the UP or DOWN part of the INFO switch to highlight the SETTINGS menu and press the INFO button to confirm.
Scroll to MAINTENANCE and press the INFO button to confirm.
Scroll to the item that needs to be reset (SCHEDULED, TIRE ROTATION, TIRE PRESSURE) and confirm with the INFO button.
Scroll to SET TIME or SET DISTANCE and confirm with the INFO button.
Turn the ignition off and then start the engine to verify the indicator has been reset.
- Reset Instructions
In case the maintenance info is not active it can be setup by following this procedure:
- Maintenance Info Setup
When doing the oil change and topping up fluids you will need to use the following specifications:
Engine Size | 4 Cyl. 2.5L Gas |
Motor Oil | *0W20*Recommended for USA and Canada |
Oil Capacity w/Filter | 4.8 US qt. (4.5L) |
Clutch Fluid | SAE J1703 or FMVSS116 DOT-3 |
Brake Fluid | SAE J1703 or FMVSS116 DOT-3 |
Engine Coolant | Mazda Genuine Coolant |
Automatic Transmission | Mazda Genuine ATF FZ |
Manual Transmission | API GL-4 or SAE 75W-80 |
You can cross reference the following Purolator filter numbers for your own application:
Engine Size | 4 Cyl. 2.5L Gas |
Oil Filter | L14612 |
Air Filter | A26280 |
Cabin Filter | *Dealer Part |
