The 2013 Toyota Avalon sedan is also offered in a hybrid gasoline model. After performing an oil change the maintenance data will need to be reset:
1. Turn the ignition to run (one position before starting engine).
2. Ensure trip meter reading A is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Continue to press and hold the knob until the trip meter displays “000000”.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
When doing the oil change and topping up fluids you will need to use the following specifications:
Engine Size | 4 Cyl. 2.5L Hybrid |
Motor Oil | 0W20 |
Oil Capacity w/Filter | 4.6 US qt. (4.4L) |
Brake Fluid | Dot 3 |
Engine Coolant | Toyota Super Long Life Coolant |
Automatic Transmission | Toyota Genuine ATF WS |
You can cross reference the following Purolator filter numbers for your own application:
Engine Size | 4 Cyl. 2.5L Hybrid |
Oil Filter | L25608 |
Air Filter | A25786 |
Cabin Filter | C35667 |
- 2.5L 4 Cyl. Hybrid
