To reset the 2016 Volkswagen Tiguan service light after an oil change, please follow these instructions: 1) With the ignition turned off, hold the 0.0 SET button pressed. 2) Turn on the ignition. Release the 0.0 SET button. 3) Press the OK button on the multifunction steering wheel or the OK button on the windshield […]
2016 Volkswagen Tiguan Service Light Reset Read More »
To reset the 2016 Toyota Corolla maintenance light after an oil change, please follow these instructions: 1. Press the “ENGINE START STOP” switch once (do not start engine) or turn ignition key to run (one position before starting engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While pressing the
2016 Toyota Corolla Maintenance Light Reset Read More »
To reset the 2016 Ram ProMaster oil life after an oil change, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been
2016 Ram ProMaster Oil Life Reset Read More »
To reset the 2016 Nissan Rogue maintenance info after an oil change, please follow these instructions: 1. Turn the ignition to run (one position before starting engine/push START/STOP button once). 2. Press the square button, located on the left side of the steering wheel, to display the SETTINGS mode. 3. Use the up/down arrow buttons
2016 Nissan Rogue Maintenance Info Reset Read More »
