1. Turn the ignition to run (one position before starting engine). 2. Press SETUP to display OIL LIFE %. 3. Press RESET button to display “HOLD RESET IF NEW OIL”. 4. Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET TO 100%” is […]
2010 MERCURY Mountaineer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press SETUP to display OIL LIFE %. 3. Press RESET button to display “HOLD RESET IF NEW OIL”. 4. Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET TO 100%” is
2009 MERCURY Mountaineer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press SETUP to display OIL LIFE %. 3. Press RESET button to display “HOLD RESET IF NEW OIL”. 4. Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET TO 100%” is
2008 MERCURY Mountaineer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Enter SYSTEM CHECK to display “OIL XXX% OIL LIFE OK”. 3. Press RESET button to display “HOLD RESET IF NEW OIL”. 4. Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET
2007 MERCURY Mountaineer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Enter SYSTEM CHECK to display “OIL XXX% OIL LIFE OK”. 3. Press RESET button to display “HOLD RESET IF NEW OIL”. 4. Press and hold the RESET button for more than two seconds. Oil life is set to 100% and “OIL CHANGE SET
2006 MERCURY Mountaineer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Select this function from the SETUP control “PRESS RESET AT OIL CHANGE”. 3. Press RESET control to reset oil change. 4. Turn the ignition off and then start the engine to verify the indicator has been reset.
2005 MERCURY Mountaineer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Select this function from the SETUP control “PRESS RESET AT OIL CHANGE”. 3. Press RESET control to reset oil change. 4. Turn the ignition off and then start the engine to verify the indicator has been reset.
2004 MERCURY Mountaineer Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press and release the SETUP button to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold the RESET button for two seconds and release to reset the oil life to 100% and “OIL LIFE SET TO 100%” is displayed. 4.
2011 MERCURY Mariner Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press and release the SETUP button to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold the RESET button for two seconds and release to reset the oil life to 100% and “OIL LIFE SET TO 100%” is displayed. 4.
2010 MERCURY Mariner Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press and release the SETUP button to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold the RESET button for two seconds and release to reset the oil life to 100% and “OIL LIFE SET TO 100%” is displayed. 4.
2009 MERCURY Mariner Maintenance Light Reset Instructions Read More »
