1. Turn the ignition to run (one position before starting engine). 2. Press SELECT to change the oil life start value. OIL LIFE START VALUE SET TO XXX% will be displayed. 3. Press and hold the RESET control for two seconds and release. Oil life is set to 100% “OIL LIFE XXX% HOLD RESET IF […]

1. Turn the ignition to position 1 (one position before starting the engine). 2. The kilometre/mileage counter must appear in the display. If not displayed, press the down button repeatedly until displayed. 3. Press the left arrow button repeatedly until “trip” is displayed. 4. Press and hold phone button and then within 1 second press

1. Turn the ignition to position 1 (one position before starting the engine). 2. The kilometre/mileage counter must appear in the display. If not displayed, press the down button repeatedly until displayed. 3. Press the left arrow button repeatedly until “trip” is displayed. 4. Press and hold phone button and then within 1 second press

1. Turn the ignition to position 1 (one position before starting the engine). 2. The kilometre/mileage counter must appear in the display. If not displayed, press the down button repeatedly until displayed. 3. Press the left arrow button repeatedly until “trip” is displayed. 4. Press and hold phone button and then within 1 second press

1. Turn the ignition to position 1 (one position before starting the engine). 2. The kilometre/mileage counter must appear in the display. If not displayed, press the down button repeatedly until displayed. 3. Press the left arrow button repeatedly until “trip” is displayed. 4. Press and hold phone button and then within 1 second press

1. Turn the ignition to position 1 (one position before starting the engine). 2. The kilometre/mileage counter must appear in the display. If not displayed, press the down button repeatedly until displayed. 3. Press the left arrow button repeatedly until “trip” is displayed. 4. Press and hold phone button and then within 1 second press

1. Turn the ignition to position 1 (one position before starting the engine). 2. The kilometre/mileage counter must appear in the display. If not displayed, press the down button repeatedly until displayed. 3. Press the left arrow button repeatedly until “trip” is displayed. 4. Press and hold phone button and then within 1 second press

1. Turn the ignition to position 1 (one position before starting the engine). 2. Press the system selection button (3 located on the lower left of the steering wheel) repeatedly until the kilometer reading is shown in the multi information display.) 3. Press the cluster illumination button (lower left of instrument panel) quickly 3 times.

1. Turn the ignition to position 1 (one position before starting the engine). 2. Press the system selection button (3 located on the lower left of the steering wheel) repeatedly until the kilometer reading is shown in the multi information display.) 3. Press the cluster illumination button (lower left of instrument panel) quickly 3 times.

1. Turn the ignition to position 1 (one position before starting the engine). 2. Press the system selection button (3 located on the lower left of the steering wheel) repeatedly until the kilometer reading is shown in the multi information display.) 3. Press the cluster illumination button (lower left of instrument panel) quickly 3 times.