You can also read our Blog on how to reset the light and service this vehicle. 1. Turn the ignition to run (one position before starting engine). 2. If the engine oil life is not displayed, press the SEL/RESET button on the steering wheel repeatedly until it is. 3. Press and hold the SEL/RESET button […]

1. Turn the ignition to run (one position before starting engine). 2. If the engine oil life is not displayed, press the SEL/RESET button on the steering wheel repeatedly until it is. 3. Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on

1. Turn the ignition to run (one position before starting engine). 2. If the engine oil life is not displayed, press the SEL/RESET button on the steering wheel repeatedly until it is. 3. Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on

1. Turn off the engine. 2. Press and hold the SELECT/RESET button in the instrument panel and turn the ignition switch to run (one position before starting). 3. Hold the button for at least 10 seconds, until the indicator resets. 4. Turn the ignition off and then start the engine to verify the indicator has

1. Turn off the engine. 2. Press and hold the TRIP button in the instrument panel and turn the ignition switch to run (one position before starting). 3. Hold the button for at least 10 seconds, until the “MAINT REQD” indicator goes out. 4. Turn the ignition off and then start the engine to verify

1. Turn off the engine. 2. Press and hold the TRIP button in the instrument panel and turn the ignition switch to run (one position before starting). 3. Hold the button for at least 10 seconds, until the “MAINT REQD” indicator goes out. 4. Turn the ignition off and then start the engine to verify

1. Turn off the engine. 2. Press and hold the TRIP button in the instrument panel and turn the ignition switch to run (one position before starting). 3. Hold the button for at least 10 seconds, until the “MAINT REQD” indicator goes out. 4. Turn the ignition off and then start the engine to verify

1. Turn off the engine. 2. Press and hold the TRIP button in the instrument panel and turn the ignition switch to run (one position before starting). 3. Hold the button for at least 10 seconds, until the “MAINT REQD” indicator goes out. 4. Turn the ignition off and then start the engine to verify

1. Turn off the engine. 2. Press and hold the TRIP button in the instrument panel and turn the ignition switch to run (one position before starting). 3. Hold the button for at least 10 seconds, until the “MAINT REQD” indicator goes out. 4. Turn the ignition off and then start the engine to verify

1. Turn off the engine. 2. Press and hold the TRIP button in the instrument panel and turn the ignition switch to run (one position before starting). 3. Hold the button for at least 10 seconds, until the “MAINT REQD” indicator goes out. 4. Turn the ignition off and then start the engine to verify