1. Turn the ignition to run (one position before starting engine). 2. press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display “OIL LIFE RESET TO 100%”. 3. Turn the ignition off and then start the engine to verify […]

1. Turn the ignition to run (one position before starting engine). 2. press and hold the OIL CHANGE RESET control for 5 seconds. The message centre will count down for 5 seconds and the message centre will display “OIL LIFE RESET TO 100%”. 3. Turn the ignition off and then start the engine to verify

1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the

1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the

1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the

1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the

1. Turn the ignition to run (one position before starting engine). 2. Press both the accelerator and brake pedals at the same time. 3. Keep both pedals fully pressed. After 3 seconds the “Service:Oil reset in prog.” message will be displayed. 4. After 25 seconds, the “Service: Oil reset complete” message will be displayed. 5.

1. Turn the ignition to run (one position before starting engine). 2. Select the OIL CHANGE XXX% from INFO menu then press the SET control to access the system check function. 3. Press and release the SET control to display “OIL CHNG XXX% HOLD SET NEW”. 4. Press and hold the SET control for 2

1. Turn the ignition to run (one position before starting engine). 2. Select the OIL CHANGE XXX% from INFO menu then press the SET control to access the system check function. 3. Press and release the SET control to display “OIL CHNG XXX% HOLD SET NEW”. 4. Press and hold the SET control for 2

1. Turn the ignition to run (one position before starting engine). 2. Use the left steering wheel controls to scroll through the message center. Press the up/down arrow repeatedly until OIL LIFE RESET is selected. 3. Press OK to select this option and display SET XXX%. 4. Press and hold OK again for 2 seconds