1. Turn the ignition to run (one position before starting engine). 2. *Display the OIL LIFE REMAINING on the DIC (i) button. If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display. 3. Press and hold the SET/RESET (check mark) button on the DIC, or the […]
2011 Avalanche Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. *Display the OIL LIFE REMAINING on the DIC (i) button. If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display. 3. Press and hold the SET/RESET (check mark) button on the DIC, or the
2010 Avalanche Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. *Display the OIL LIFE REMAINING on the DIC (i) button. If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display. 3. Press and hold the SET/RESET (check mark) button on the DIC, or the
2009 Avalanche Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. *Display the OIL LIFE REMAINING on the DIC (i) button. If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display. 3. Press and hold the SET/RESET (check mark) button on the DIC, or the
2008 Avalanche Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. *Display the OIL LIFE REMAINING on the DIC (i) button. If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display. 3. Press and hold the SET/RESET (check mark) button on the DIC, or the
2007 Avalanche Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been
2006 Avalanche Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been
2005 Avalanche Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been
2004 Avalanche Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been
2003 Avalanche Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been
2002 Avalanche Maintenance Light Reset Instructions Read More »
