non Multi-Information Display: 1. Turn the ignition to run (one position before starting engine). 2. Press the SELECT/RESET knob repeatedly until the engine oil life indicator is displayed. 3. Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink. 4. Press the SELECT/RESET knob for […]
2014 HONDA Pilot Maintenance Light Reset Instructions Read More »
non Multi-Information Display: 1. Turn the ignition to run (one position before starting engine). 2. Press and hold the SELECT/RESET knob for 10 seconds or more. 3. Turn the SELECT/RESET knob to select oil life. 4. Press and hold the SELECT/RESET knob to enter the oil life reset mode. 5. Press and hold the SELECT/RESET
2014 HONDA Odyssey Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. If the engine oil life is not displayed, press the SEL/RESET button on the steering wheel repeatedly until it is. 3. Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on
2014 HONDA Insight Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Display the engine oil life by repeatedly pressing the (up/down) button on the steering wheel. 3. Press and hold the SEL/RESET for more than 10 seconds. The oil life reset mode is displayed on the multi information display. 4. Select RESET with the
2014 HONDA CR-Z Maintenance Light Reset Instructions Read More »
To reset the 2017 Acura TLX maintenance light after an oil change service, please follow these instructions: Set the power mode to ON (do not start the engine). Press the right selector wheel until the content is displayed. Roll the right selector wheel until the Maintenance screen is displayed. Press and hold the right selector
2022 Acura TLX Maintenance Minder Reset Read More »
non Multi-Information Display: 1. Turn the ignition to run (one position before starting engine). 2. Press the SELECT/RESET knob repeatedly until the engine oil life is displayed. 3. Press the SELECT/RESET knob for about 10 seconds. The information display shows the reset mode initial display. 4. Select the ‘‘OIL LIFE’’ indicator by turning the SELECT/RESET
2014 HONDA CR-V Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press the SELECT/RESET knob until the engine oil life indicator is displayed. 3. Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink. 4. Press the SELECT/RESET knob for more than 5 seconds.
2014 HONDA Crosstour Maintenance Light Reset Instructions Read More »
non Multi-Information Display: 1. Turn the ignition to run (one position before starting engine). 2. Press the SELECT/RESET knob until the engine oil life indicator is displayed. 3. Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink. 4. Press the SELECT/RESET knob for more
2014 HONDA Civic Maintenance Light Reset Instructions Read More »
Multi-Information Display: 1. Turn the ignition to run (one position before starting engine). 2. Press the (up/down) button to select Vehicle Settings, then press the SEL/RESET button. 3. Press the (up/down) button until Maintenance Reset appears on the display. 4. Press the SEL/RESET button – the oil life reset mode is displayed on the multi-information
2014 HONDA Accord Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Press the brake and gas pedals at the same time; after 3 seconds the “Service: Oil reset in prog.” message will appear and after 25 seconds the “Service: Oil reset complete” message will appear. 3. Release the brake and gas pedals. 4. Turn
2014 FORD Transit Connect Maintenance Light Reset Instructions Read More »
