1. Turn the ignition to run (one position before starting engine). 2. Press the MENU button to show Remaining Oil Life on the display (use the arrows to highlight the Remaining Oil Life). 3. Press and hold the SET/CLR button on the DIC for more than five seconds. The oil life will change to 100%. […]

1. Turn the ignition to run (one position before starting engine). 2. Press the MENU button on the turn signal lever to show Remaining Oil Life on the display. 3. To reset the engine oil life system, press the SET/CLR button while the oil life display is visible. After a few seconds, there will be

1. Turn the ignition to run (one position before starting engine). 2. Press the DIC MENU button on the turn signal lever to enter the Vehicle Information Menu. 3. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE. 4. Press the SET/CLR button to reset the oil life at

1. Turn the ignition to run (one position before starting engine). 2. Use the DIC arrow buttons on the right side of the steering wheel to display OIL LIFE REMAINING. 3. Press and hold the (check mark) button until REMAINING OIL LIFE 100% appears. 4. Turn the ignition off and then start the engine to

1. Turn the ignition to run (one position before starting engine). 2. Press the DIC menu button on the turn signal lever to enter the vehicle information menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE. 3. Press the SET/CLR button to reset the oil life to 100%.

1. Turn the ignition to run (one position before starting engine). 2. Use the DIC arrow buttons on the right side of the steering wheel to display OIL LIFE REMAINING. 3. Press and hold the SEL button until REMAINING OIL LIFE 100% appears. 4. Turn the ignition off and then start the engine to verify

1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the OIL LIFE REMAINING value is not 100%, the system needs to be reset again. 4. Turn the ignition off and then start the engine to

1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the “Change Engine Oil Soon” message is not on, the system is reset. If it is on, turn the ignition off and repeat steps 1-2. 4.

1. Turn the ignition to run (one position before starting engine). 2. *Use the DIC controls on the right side of the steering wheel to display the REMAINING OIL LIFE. 3. Press SEL on the DIC controls. 4. Hold SEL down for a few seconds to reset the oil life to 100%. 5. Turn the

1. Turn the ignition to run (one position before starting engine). 2. *Use the DIC controls on the right side of the steering wheel to display the REMAINING OIL LIFE. 3. Press SEL on the DIC controls. 4. Hold SEL down for a few seconds to reset the oil life to 100%. 5. Turn the