1. Turn the ignition to run (one position before starting engine). 2. Press the INFO button and select the Maintenance Key using the NISSAN controller; the maintenance information will be displayed on the screen. 3. Select one of the Reminder (1 – 4) keys using the NISSAN controller and press the ENTER button to display […]

1. Turn the ignition to run (one position before starting engine). 2. Press the INFO button and select the Maintenance Key using the NISSAN controller; the maintenance information will be displayed on the screen. 3. Select one of the Reminder (1 – 4) keys using the NISSAN controller and press the ENTER button to display

1. Turn the ignition to run (one position before starting engine). 2. Press the INFO button and select the Maintenance Key using the NISSAN controller; the maintenance information will be displayed on the screen. 3. Select one of the Reminder (1 – 4) keys using the NISSAN controller and press the ENTER button to display

1. Turn the ignition to run (push START/STOP button once). 2. Switches for the trip computer are located on the right side of the combination meter panel. Press the square button to bring up “Setting” and and press the circle button to select. 3. Use the circle button to scroll to MAINTENANCE and use the

1. Turn the ignition to run (push START/STOP button once). 2. Switches for the trip computer are located on the right side of the combination meter panel. Press the square button to bring up “Setting” and and press the circle button to select. 3. Use the circle button to scroll to MAINTENANCE and use the

1. Turn the ignition to run (push START/STOP button once). 2. Switches for the trip computer are located on the right side of the combination meter panel. Press the square button to bring up “Setting” and and press the circle button to select. 3. Use the circle button to scroll to MAINTENANCE and use the

1. Turn the ignition to run (push START/STOP button once). 2. Switches for the trip computer are located on the right side of the combination meter panel. Press the square button to bring up “Setting” and and press the circle button to select. 3. Use the circle button to scroll to MAINTENANCE and use the

1. Turn the ignition to run (push START/STOP button once). 2. Switches for the trip computer are located on the right side of the combination meter panel. Press the square button to bring up “Setting” and and press the circle button to select. 3. Use the circle button to scroll to MAINTENANCE and use the

1. Turn the ignition to run (one position before starting engine). 2. Maintenance and tire pressure information will be displayed when the “MAINT” button is pushed on the centre console. 3. To display the setting of the maintenance interval, select the “Engine Oil” key using the joystick and push the “ENTER” button. 4. To reset

1. Turn the ignition to run (push START/STOP button once). 2. Press the square button, located on the instrument panel just behind the steering wheel to the left, to display the SETTINGS mode. 3. In the SETTINGS mode screen press the circle button to move to MAINTENANCE. 4. Select ENGINE OIL and follow the prompts.