To reset the 2016 Honda CR-V maintenance light after an oil change, please follow these instructions: Multi-Information Display: 1. Turn the ignition to run (one position before starting engine). 2. Press the (up/down) button to select Vehicle Settings, then press the SEL/RESET button. 3. Press the (up/down) button until Maintenance Reset appears on the display. […]
2016 Honda CR-V Maintenance Light Reset Read More »
To reset the 2016 GMC Terrain remaining oil life after an oil change, please follow these instructions: With Driver Information Centre (DIC): 1. Turn the ignition to run (one position before starting engine). 2. Press the MENU button until vehicle information menu is displayed then scroll through the menu with the down arrow until Remaining
2016 GMC Terrrain Remaining Oil Life Reset Read More »
To reset the Ford Edge oil life after an oil change, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Use the steering wheel controls to scroll to the Settings Menu and press the right arrow button. 3. Scroll to the Vehicle Menu and press the right arrow
2016 Ford Edge Oil Life Reset Read More »
To reset the 2016 Fiat 500L oil change indicator after an oil change, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has
2016 Fiat 500L Oil Change Indicator Reset Read More »
To reset the 2016 Dodge Dart oil life after an oil change, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been
2016 Dodge Dart Oil Life Reset Read More »
To reset the 2016 Chevrolet Trax remaining oil life after an oil change, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Press the MENU button located on the turn signal lever. 3. Use the thumbwheel to scroll to REMAINING OIL LIFE. 4. To reset the engine oil
2016 Chevrolet Trax Remaining Oil Life Reset Read More »
To reset the Volvo XC60 service reminder indicator after an oil change, please follow these instructions: 1. Turn the ignition to position I. 2. Press and hold in the OK button on the left steering wheel stalk. 3. Continue to hold OK, turn the ignition switch to position II. 4. Wait for 10 seconds. Release
Volvo XC60 Service Reminder Indicator Reset Read More »
To reset the 2016 Volkswagen Golf oil change service reminder, please follow these instructions: 1) With the ignition turned off, hold the 0.0 button pressed. 2) Switch on the ignition. Wait until “Reset oil change service?” appears in the display. 3) Release the button 0.0 button. The service interval display is now in reset mode.
2016 Volkswagen Golf Oil Change Service Reset Read More »
To reset the 2016 Toyota 4Runner maintenance data after an oil change, please follow these instructions: 1. Start the engine and bring up the trip meter A reading. Vehicles with smart key system: 2. Turn the “ENGINE START STOP” switch off. 3. While pressing the Trip Meter reset button, press the “ENGINE START STOP” switch
2016 Toyota 4Runner Maintenance Data Reset Read More »
To reset the 2016 Subaru WRX maintenance light after an oil change, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Using the controsl on the left hand side of the steering wheel. Pull the i/Set button towards you to bring up the selection screen. 3. Use the
Reset the 2016 Subaru WRX Maintenance Light Read More »
