To reset the 2000 Mercedes Sprinter Maintenance Light, please follow these instructions: 1) Turn the ignition to run (one position before starting the engine). 2) Press the “km” or “mi” button 2 times.  Turn the ignition off. 3) Press and hold the “km” or “mi” button and continue to hold while turning the ignition to

To reset the 2013 MAZDA6 Maintenance light, please follow these instructions: Turn the ignition to run (do not start the engine). Press the UP or DOWN part of the INFO switch to highlight the SETTINGS menu and press the INFO button to confirm. Scroll to MAINTENANCE and press the INFO button to confirm. Scroll to

To reset the 2010 Lincoln MKZ Oil Life, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4.

To reset the 2008 Jeep Grand Cherokee Oil Change Interval, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.  

To reset the 2004 Hummer H2 Engine Oil Life, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Press the fuel information button (located on instrument panel cluster above steering column) until ENGINE OIL LIFE appears in the display. 3. Press and hold the select button (arrow button)

To reset the 2010 Jaguar XF Engine Oil Life, please follow these instructions: 1. With the ignition off, press and hold down the rear fog lamp button (located to the left of the steering wheel). 2. While holding down the rear fog lamp button turn the igntion on (do not start the engine). 3. Immediately

To reset the 2010 Ford Escape Oil Life, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Press and release the SETUP button to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold the RESET button for two seconds and release to reset the oil

To reset the 2014 Ford C-MAX engine oil life, please follow these directions: 1. Turn the ignition to run (one position before starting engine). 2. Press the brake and gas pedals at the same time; after 3 seconds the “Service: Oil reset in prog.” message will appear and after 25 seconds the “Service: Oil reset

To reset the 2012 GMC Canyon oil life, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Press and release the TRIP/RESET stem button in the DIC until the OIL LIFE message is displayed (located in the lower centre of instrument cluster). 3. Once the alternating OIL LIFE

To reset the 2012 Chevrolet Colorado Engine Oil Life, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Press and release the TRIP/RESET stem button in the DIC until the OIL LIFE message is displayed (located in the lower centre of instrument cluster). 3. Once the alternating OIL