To reset the 2013 Audi A4 service interval, please follow these instructions: 1. Start the engine. 2. Press the CAR button to access the service menu. 3. From the CAR menu select CAR SYSTEMS. 4. From the CAR SYSTEMS menu select SERVICE INTERVALS. 5. Select RESET OIL CHANGE INTERVAL and confirm. 6. Turn off […]

To reset the 2o10 Mitsubishi Lancer service inspection light, please follow these instructions: 1. The “—” display can be reset while the ignition switch is “OFF”.  When the display is reset, the time until the next periodic inspection is displayed and “PERIODIC INSPECTION” is no longer displayed when the ignition is switched from “OFF” to

To reset the 2007 Mini Cooper Condition Based Service (CBS) after a service, please follow these instructions: 1. Press the START/STOP button to turn the ignition to run (do not press the brake pedal).2. Press and hold the trip odometer reset button for approximately 10 seconds until the first service job appears in the display.3. The

To reset the 2010 Range Rover LR2 service interval, please follow these instructions: 1.With the engine off, press and hold the trip reset button. 2. While holding the trip reset button, press the START/STOP button to turn the ignition on (do not press the brake pedal). 3. Release the trip reset button within 10 seconds

To reset the 2012 Volvo S60 SRI light, please familiarize yourself with the ignition positions and follow these instructions: 1. Prese the Start/Stop button once quickly (do not press the brake pedal). 2. Press and hold in the TRIP/ODOMETER reset button. 3. Within 2 seconds, press the Start/Stop to got to ignition position II. 4.

To reset the 2008 Pontiac G8 oil change reminder light please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. Turn the ignition off and then start the engine to verify the indicator

To reset the 2009 Toyota Yaris maintenance required (MAINT REQD) light please follow these instructions: 1. Turn the ignition to ON (one position before starting engine). 2. Ensure odometer reading is shown.  Turn ignition off. 3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine). 4.

To reset the 2011 Volkswagen Jetta, you may have 3 options depending on the package the vehicle is equipped with: Using the instrument cluster buttons: 1. Turn the ignition off. 2. Press and hold the 0,0 button (located to the right of the instrument cluster). 3. Turn the igntion on (do not start the engine)

To reset the 2004 Saturn Vue oil change light, please follow these instructions: 1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.  If the Change Engine Oil light is flashing, the system is reset.  The light will

To reset the 2014 Scion tC maintenance data you will need to follow these instructions: 1. Start the engine. 2. Select trip metre A reading by using the trip metre button and then turn the ignition off. 3. While pressing the trip meter reset button, turn the ignition switch to run (one position before starting