1. Press and hold the TRIP button with the ignition switched off. 2. Continue to hold the TRIP button and switch the ignition on. 3. After 5 seconds the master warning light will flash for a few seconds to indicate the reset is complete. 4. Turn the ignition off and then start the engine to […]

1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP to display “OIL LIFE XXX% HOLD RESET = NEW”. 3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%. 4. Turn the ignition off and then start the engine to verify the

1. Turn the ignition to run (one position before starting engine/ one push of START/STOP button). 2. Using the arrow keypad (left of steering wheel) select SETTINGS. 3. From the SETTINGS menu select VEHICLE. 4. From the VEHICLE menu select OIL LIFE RESET followed by OK. 5. Turn the ignition off and then start the

1. Turn the ignition to run (one position before starting engine/ one push of START/STOP button). 2. Using the arrow keypad (left of steering wheel) select SETTINGS. 3. From the SETTINGS menu select VEHICLE. 4. From the VEHICLE menu select OIL LIFE RESET followed by OK. 5. Turn the ignition off and then start the

1. Turn the ignition to run (one position before starting engine). 2. Press the brake and gas pedals at the same time; after 3 seconds the “Service: Oil reset in prog.” message will appear and after 25 seconds the “Service: Oil reset complete” message will appear. 3. Release the brake and gas pedals. 4. Turn

1. Turn the ignition to run (one position before starting engine/ one push of START/STOP button). 2. Using the arrow keypad (left of steering wheel) select SETTINGS. 3. From the SETTINGS menu select VEHICLE. 4. From the VEHICLE menu select OIL LIFE RESET followed by OK. 5. Turn the ignition off and then start the

1. Turn the ignition to run (one position before starting engine/ one push of START/STOP button). 2. Using the arrow keypad (left of steering wheel) select SETTINGS. 3. From the SETTINGS menu select VEHICLE. 4. From the VEHICLE menu select OIL LIFE RESET followed by OK. 5. Turn the ignition off and then start the

1. Turn the ignition to run (one position before starting engine/ one push of START/STOP button). 2. Using the arrow keypad (left of steering wheel) select SETTINGS. 3. From the SETTINGS menu select VEHICLE. 4. From the VEHICLE menu select OIL LIFE RESET followed by RESET. 5. Turn the ignition off and then start the

1. Turn the ignition to run (push START/STOP button once). Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off. 2. While pressing the “ODO/TRIP” button, set the engine switch to run (push START/STOP button once). 3. Continue holding the “ODO/TRIP button for about 5 seconds. The resetting

1. Turn the engine on by holding the START/STOP switch. Use the trip meter switch to bring up the trip meter A reading. Turn the ignition off. 2. While pressing the trip meter reset button, set the engine switch to run (push START/ STOP button once) and continue to press and hold the knob until