1. Turn the ignition to run (one position before starting engine). 2. Select this function from the SETUP control “PRESS RESET AT OIL CHANGE”. 3. Press RESET control to reset oil change. 4. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine). 2. Press the brake and gas pedals at the same time for 20 seconds. 3. An oil lamp with wrench will display with the message ENGINE OIL CHANGE DUE NEXT SERVICE. 4. Turn the ignition off and then start the engine to verify the

1. Turn the ignition to run (one position before starting engine). 2. Press SELECT to change the oil life start value. OIL LIFE START VALUE SET TO XXX% will be displayed. 3. Press and hold the RESET control for two seconds and release. Oil life is set to 100% “OIL LIFE XXX% HOLD RESET IF

1. Turn the ignition to run (one position before starting engine). 2. Press SELECT to change the oil life start value. OIL LIFE START VALUE SET TO XXX% will be displayed. 3. Press and hold the RESET control for two seconds and release. Oil life is set to 100% “OIL LIFE XXX% HOLD RESET IF

1. Turn the ignition to run (one position before starting engine). 2. Press SELECT to change the oil life start value. OIL LIFE START VALUE SET TO XXX% will be displayed. 3. Press and hold the RESET control for two seconds and release. Oil life is set to 100% “OIL LIFE XXX% HOLD RESET IF

1. Turn the ignition to run (one position before starting engine). 2. Press SELECT to change the oil life start value. OIL LIFE START VALUE SET TO XXX% will be displayed. 3. Press and hold the RESET control for two seconds and release. Oil life is set to 100% “OIL LIFE XXX% HOLD RESET IF

1. Turn the ignition to run (one position before starting engine). 2. Press SELECT to change the oil life start value. OIL LIFE START VALUE SET TO XXX% will be displayed. 3. Press and hold the RESET control for two seconds and release. Oil life is set to 100% “OIL LIFE XXX% HOLD RESET IF

1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.