1. Turn the ignition to run (one position before starting engine). 2. Press and release SETUP repeatedly to display OIL LIFE. 3. Press RESET to select OIL LIFE. Press SETUP to scroll through list and highlight “Set to 100%”. 4. Press RESET to select “Set to 100%”. 5. Turn the ignition off and then start […]

1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine). 2. Press the SELECT/RESET knob until the engine oil life indicator is displayed. 3. Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink. 4. Press the SELECT/RESET knob for more than 5 seconds.

1. Turn the ignition to run (one position before starting engine). 2. Fully depress the accelerator pedal slowly three times within 10 seconds. 3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine). 2. Select this function from the SETUP control “PRESS RESET AT OIL CHANGE”. 3. Press RESET control to reset oil change. 4. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).“2. Press and release the SETUP button to display ?OIL LIFE XXX% HOLD RESET = NEW””.”“3. Press and hold the RESET button for two seconds and release to reset the oil life to 100% and “”OIL LIFE SET TO 100%”” is displayed.”4. Turn the ignition

1. Turn the ignition to run (one position before starting engine). 2. Press the STATUS control to access the System Check function. 3. Press RESET to reset oil %. 4. Press and hold the RESET control to set to 100%. After a successful reset, the message centre will display OIL LIFE SET TO 100%. 5.

1. Turn the ignition to run (one position before starting engine).2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting.4. Turn the ignition off and then start the engine to verify the indicator has been reset.

With Driver Information Centre (DIC): 1. Turn the ignition to run (one position before starting engine). 2. Press the MODE button until the DIC reads OIL LIFE LEFT/HOLD SET TO RESET. 3. Press and hold the SET button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will

1.With the engine off, press and hold the trip reset button. 2. While holding the trip reset button, turn the ignition to run (one position before starting engine). 3. Release the trip reset button within 10 seconds of turning the ignition to run. If the manual reset mode has been successfully entered ‘dISt’ or ‘DATE’