1. Turn the ignition to run (one position before starting engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While pressing the DISP button turn the igniton on (do not start the engine). 4. Continue to press and hold the button until the trip meter displays “000000”. 5. Turn the […]

Vehicles without smart key system 1. Turn the ignition to run (one position before starting engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine). 4. Hold down knob for at least 5

Vehicles without smart key system 1. Turn the ignition to run (one position before starting engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine). 4. Hold down knob for at least 5

Vehicles without smart key system 1. Turn the ignition to run (one position before starting engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine). 4. Hold down knob for at least 5

Vehicles without smart key system 1. Turn the ignition to run (one position before starting engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine). 4. Hold down knob for at least 5

1. Turn the ignition to run (one position before starting engine). 2. Ensure odometer reading is shown. Turn ignition off. 3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine). 4. Hold down knob for at least 5 seconds. The odometer indicates “000000” and the light

1. Turn the ignition to run (one position before starting engine). 2. Ensure odometer reading is shown. Turn ignition off. 3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine). 4. Hold down knob for at least 5 seconds. The odometer indicates “000000” and the light

1. Press the “ENGINE START STOP” switch once (do not start engine). 2. Ensure odometer reading is shown. Turn ignition off. 3. Press the “ENGINE START STOP” switch once (do not start engine). The multi-information screen will be displayed for a few seonds. While it is being displayed press the TRIP switch 3 times and

1. Press the “ENGINE START STOP” switch once (do not start engine) or turn ignition key to run (one position before starting engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While holding the MPH or KM/H button turn the ignition on (do not start engine). 4. Continue to press

1. Press the “ENGINE START STOP” switch once (do not start engine) or turn ignition key to run (one position before starting engine). 2. Ensure Trip Metre A reading is shown. Turn the ignition off. 3. While holding the MPH or KM/H button turn the ignition on (do not start engine). 4. Continue to press