1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. If the Change Engine Oil light is flashing, the system is reset. The light will flash for up to 30 seconds or until the ignition is turned off.

1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. If the Change Engine Oil light is flashing, the system is reset. The light will flash for up to 30 seconds or until the ignition is turned off.

1. Turn the ignition to run (one position before starting engine). 2. Press the information and reset buttons on the DIC at the same time to enter the personalization menu. 3. Press the information button to scroll through the available personalization menu modes until the DIC display shows OIL-LIFE RESET. 4. Press and hold the

1. Turn the ignition to run (one position before starting engine). 2. Press the information and reset buttons on the DIC at the same time to enter the personalization menu. 3. Press the information button to scroll through the available personalization menu modes until the DIC display shows OIL-LIFE RESET. 4. Press and hold the

1. Turn the ignition to run (one position before starting engine). 2. Push the set/reset button until OIL is displayed on the DIC. 3. Once OIL is displayed, push and hold the set/reset button for 5 seconds. The number will disappear and be replaced by 100 (indicating 100% oil life remaining). 4. Turn the ignition

1. Turn the ignition to run (one position before starting engine). 2. Push the set/reset button until OIL is displayed on the DIC. 3. Once OIL is displayed, push and hold the set/reset button for 5 seconds. The number will disappear and be replaced by 100 (indicating 100% oil life remaining). 4. Turn the ignition

Vehicle does not have Driver Information Center (DIC) buttons: 1. Turn the ignition to run (one position before starting engine). 2. Press the trip odometer reset stem until OIL LIFE REMAINING displays. 3. Press and hold the trip odometer reset stem until OIL LIFE REMAINING shows 100%. You will hear 3 chimes and the CHANGE

Vehicle does not have Driver Information Center (DIC) buttons: 1. Turn the ignition to run (one position before starting engine). 2. Press the trip odometer reset stem until OIL LIFE REMAINING displays. 3. Press and hold the trip odometer reset stem until OIL LIFE REMAINING shows 100%. You will hear 3 chimes and the CHANGE

1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. If the Change Engine Oil light is flashing, the system is reset. The light will flash for up to 30 seconds or until the ignition is turned off.

1. Turn the ignition to run (one position before starting engine). 2. Press and release the trip/reset button until the OIL LIFE message is displayed. 3. Then press and hold the trip/reset button until a chime sounds 5 times, and RESET is displayed in the message centre. When the system is reset, the odometer will