1. Turn the ignition to run (one position before starting engine). 2. When you turn the ignition key run, the system start-up warning is displayed on the screen. Read the the warning and select the OK key by pressing the ENTER button. 3. When the TRIP button is pressed, the following modes will display on […]

1. Turn the ignition to run (push START/STOP button once). 2. Switches for the trip computer are located on the right side of the combination meter panel. Press the square button to bring up “Setting” and and press the circle button to select. 3. Use the circle button to scroll to MAINTENANCE and use the

1. Push the ignition switch to the ON position (do not start the engine). Use the ENTER button (square) and toggle the vehicle information display to show the SETTING screen. Use the NEXT button (circle) to select. 2. Use the NEXT button (circle) to select MAINTENANCE, then confirm with ENTER button (square) to change to

1. Push the ignition switch to the ON position (do not start the engine). Use the ENTER button (square) and toggle the vehicle information display to show the SETTING screen. Use the NEXT button (circle) to select. 2. Use the NEXT button (circle) to select MAINTENANCE, then confirm with ENTER button (square) to change to

1. Push the ignition switch to the ON position (do not start the engine). Use the ENTER button (square) and toggle the vehicle information display to show the SETTING screen. Use the NEXT button (circle) to select. 2. Use the NEXT button (circle) to select MAINTENANCE, then confirm with ENTER button (square) to change to

1. Push the ignition switch to the ON position (do not start the engine). Use the ENTER button (square) and toggle the vehicle information display to show the SETTING screen. Use the NEXT button (circle) to select. 2. Use the NEXT button (circle) to select MAINTENANCE, then confirm with ENTER button (square) to change to

1. Turn the ignition to run (one position before starting engine). The maintenance information (the wrench symbol and distance to change a maintenance item) comes on for about 5 seconds and then turns off. 2. Push the trip button and hold for 3 seconds while the wrench symbol and maintenance information are are displayed. The

1. Turn the ignition to run (one position before starting engine). The maintenance information (the wrench symbol and distance to change a maintenance item) comes on for about 5 seconds and then turns off. 2. Push the trip button and hold for 3 seconds while the wrench symbol and maintenance information are are displayed. The

1. Turn the ignition to run (one position before starting engine). The maintenance information (the wrench symbol and distance to change a maintenance item) comes on for about 5 seconds and then turns off. 2. Push the trip button and hold for 3 seconds while the wrench symbol and maintenance information are are displayed. The

1. Turn the ignition to run (one position before starting engine). The maintenance information (the wrench symbol and distance to change a maintenance item) comes on for about 5 seconds and then turns off. 2. Push the trip button and hold for 3 seconds while the wrench symbol and maintenance information are are displayed. The