1. Turn the ignition to run – engine off (push START/STOP button once). 2. Press the “DISP” switch to change the multi-information display to blank. Turn the ignition off. 3. While pressing the trip meter reset button, set the engine switch to run – engine off (push START/STOP button once). 4. Keep pushing the “RESET” switch for more than 7 seconds. While doing this operation, the master warning light comes on, a warning tone sounds and the “OIL MESSAGE RESET” message appears to inform you that light has been reset. After 5 seconds, the system reset is completed. 5. Turn the ignition off and then start the engine to verify the indicator has been reset.