2011 TOYOTA Camry Maintenance Light Reset Instructions

August 22, 2021 / Instructions

1. Press the “ENGINE START STOP” switch once (do not start engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While pressing the Trip Meter reset button, press the “ENGINE START STOP” switch once (do not start engine).
Without multi-information display
4. Continue to press and hold the knob until the trip meter displays “000000”.
With multi-information display
4. Continue to press and hold the knob until “COMPLETE” appears on the multi-information display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Hybrid
1. Press the “POWER” switch once (do not start engine).
2.Turn off the hybrid system with the trip meter A reading shown.
3. Ensure Trip Metre A reading is shown. Turn the ignition off.
4. While holding down the trip meter reset knob the “POWER” switch must be set in ON mode (do not start engine). A message “OIL MILEAGE RESET MODE” will appear on the display.
5. Hold down the knob for at least 5 seconds. A message “COMPLETE” will appear and the message “OIL MILEAGE RESET MODE” goes off.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.