The 2013 Acura TL is offered in a gasoline model. The engine oil will require service when the Maintenance Minder light comes on. Follow these steps to reset this light:
1. Turn the ignition to (II) – do not start the engine.
2. Press the SEL/RESET button on the steering wheel repeatedly until engine oil life is displayed.
3. Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi information display.
4. Select RESET by pressing the INFO (up/down) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
*Models equipped with the keyless access system have an engine start/stop button instead of an ignition switch. Pushing start/stop button once without starting engine is equivalent of ignition (II).
When doing the oil change and topping up fluids you will need to use the following specifications:
Engine Size | 6 Cyl. 3.5L Gas | 6 Cyl 3.7L Gas |
Motor Oil | 5W20 | 5W20 |
Oil Capacity w/Filter | 4.5 US qt. (4.3L) | 4.5 US qt. (4.3L) |
Brake Fluid | Honda Heavy Duty Dot 3 | Honda Heavy Duty Dot 3 |
Engine Coolant | Honda Long Life Coolant Type 2 | Honda Long Life Coolant Type 2 |
Automatic Transmission | Acura ATF DW-1 | Acura ATF DW-1 |
Manual Transmission | Acura Manual Transmission Fluid | Acura Manual Transmission Fluid |
Rear Differential | Acura All Wheel Drive Fluid (DPSF) | Acura All Wheel Drive Fluid (DPSF) |
Transfer Case | Acura HGO-1 | Acura HGO-1 |
You can cross reference the following Purolator filter numbers for your own application:
Engine Size | 6 Cyl. 3.5L Gas | 6 Cyl. 3.7L Gas |
Oil Filter | L14610 | L14610 |
Air Filter | A36308 | A36308 |
Cabin Filter | C35519 | C35519 |