The 2013 Escape is offered in a gasoline model. The engine oil will require service when the CHANGE OIL light comes on. Follow these steps to reset this light:
1. Press the start/stop button once (do not start the engine).
2. Press both the accelerator and brake pedals at the same time.
3. Keep both pedals fully pressed.
4. After three seconds, the Service: Oil reset in prog. message will be displayed.
5. After 25 seconds, the Service: Oil reset complete message will be displayed.
6. Release both the accelerator and brake pedals.
7. The Service: Oil reset complete message will no longer be displayed.
8. Turn the ignition off and start the engine to verify the indicator has been reset.
When doing the oil change and topping up fluids you will need to use the following specifications:
Engine Size | 2.5L | 2.0L | 1.6L |
Motor Oil | 5W20 Synthetic | 5W30 Synthetic | 5W20 Synthetic Blend |
Oil Capacity | 5.7 qt. (5.4L) | 5.7 qt. (5.4L) | 4.3 qt. (4.1L) |
Brake Fluid | High Performance Dot 4 | High Performance Dot 4 | High Performance Dot 4 |
Engine Coolant | Motorcraft Orange Coolant Prediluted | Motorcraft Orange Coolant Prediluted | Motorcraft Orange Coolant Prediluted |
Automatic Transmission | MERCON LV ATF | MERCON LV ATF | MERCON LV ATF |
Rear Differential | 80W90 | 80W90 | 80W90 |
Transfer Case | 75W140 Synthetic | 75W140 Synthetic | 75W140 Synthetic |
You can cross reference the following Purolator filter numbers for your own application:
Engine Size | 2.5L | 2.0L | 1.6L |
Oil Filter | L10241 | L10241 | L10241 |
Air Filter | A26199 | A36149 | A36149 |
Cabin Filter | C36174 | C36174 | C36174 |
Great and very good info.
regards
Not the great, “The 2013 Escape is offered in a hybrid or gasoline model” It is not offered in a hybrid
You are correct. Ford dropped the Escape Hybrid in the 2013 model year. We’ll remove that line!