The 2013 Toyota Highlander is offered in a gasoline model. After performing an oil change the maintenance data will need to be reset. Follow these steps to reset this light:
Vehicles without smart key system
1. Turn the ignition to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off. (Go to step 3)
Vehicles with smart key system
1. Press the “ENGINE START STOP” switch once (do not start engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While pressing the Trip Meter reset button, press the “ENGINE START STOP” switch once (do not start engine).
Without multi-information display: Continue to press and hold the button until the trip meter displays “000000”.
With multi-information display: Continue to press and hold the button until “COMPLETE” appears on the multi-information display.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
When doing the oil change and topping up fluids you will need to use the following specifications:
Engine Size | 4 Cyl. 2.7L Gas | 6 Cyl. 3.5L Gas |
Motor Oil | 0W20 | 0W20 |
Oil Capacity w/Filter | 4.2 US qt. (4.0L) | 6.0 US qt. (5.7L) |
Brake Fluid | Dot 3 | Dot 3 |
Engine Coolant | Toyota Super Long Life Coolant | Toyota Super Long Life Coolant |
Automatic Transmission | Toyota Genuine ATF WS | Toyota Genuine ATF WS |
Differentials | Hypoid Gear Oil API GL-5 | Hypoid Gear Oil API GL-5 |
Transfer Case | Hypoid Gear Oil API GL-5 | Hypoid Gear Oil API GL-5 |
You can cross reference the following Purolator filter numbers for your own application:
Engine Size | 4 Cyl. 2.7L Gas | 6 Cyl. 3.5L Gas |
Oil Filter | L25608 | L25608 |
Air Filter | A35432 | A35432 |
Cabin Filter | C35667 | C35567 |
- 6 Cyl. 3.5L Gas
