The 2014 Toyota Camry is offered in a gasoline model. After performing the oil change the maintenance data will need to be reset. To reset the data follow these instructions:
1. Turn the ignition to run (one position before starting engine).
2. Ensure Trip metre A reading is shown. Turn ignition off.
Vehicles with smart key system:
3.While pressing the trip meter reset button, press the “ENGINE START STOP” switch to IGNITION ON mode. Continue to press and hold the button until the trip meter displays “000000”.
Vehicles without smart key system:
3.While pressing the trip meter reset button, turn the ignition on. Continue to press and hold the button until the trip meter displays “000000”.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
When doing the oil change and topping up fluids you will need to use the following specifications:
Engine Size | 2.5L 4 Cyl. | 3.5L V6 |
Motor Oil w/Filter | OW-20 | 0W-20 |
Oil Capacity w/Filter | 4.6 US qt. (4.4L) | 6.4 US qt. (6.1L) |
Brake Fluid | DOT 3 | DOT 3 |
Engine Coolant | Toyota Super Long Life | Toyota Super Long Life |
Automatic Transmission | Toyota Genuine ATF WS | Toyota Genuine ATF WS |
You can cross reference the following Purolator filter numbers for your own application:
Engine Size | 2.5L 4 Cyl. | 3.5L V6 |
Oil Filter | L25608 | L25608 |
Air Filter | A35649 | A35649 |
Cabin Filter | C35667 | C35667 |