1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. Turn the ignition to off.
4. Turn the ignition off and start the engine to verify the indicator has been reset.
1. Start the engine.
2. Press the CAR button to access the service menu.
3. From the CAR menu select CAR SYSTEMS.
4. From the CAR SYSTEMS menu select SERVICE INTERVALS.
5. Select RESET OIL CHANGE INTERVAL and confirm.
6. Turn off the igntion.
7. Start the engine and verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
"3. If the ?Change Engine Oil Soon? message is not on
repeat steps 1-2.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine).
2. Fully depress the accelerator pedal slowly three times within 10 seconds.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.
Audi recommends the use of a reset tool. *Depening on model, reset functionality may be available via the "CAR" button. After pressing the "CAR" button scroll the menu and select "Service Interval Display". Follow the onscreen instructions to reset.
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If CHANGE ENGINE OIL light does not go out, turn off the ignition and repeat steps 1-3.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
With Driver Information Centre:
1. Turn the ignition to run (one position before starting engine).
2. Press the MODE button until OIL LIFE LEFT displays.
3. Press and hold the SET button until 100% is displayed. This will be followed by three chimes to indicate the system is reset.
4. Turn the ignition off and start the engine to verify the indicator has been reset.
Without Driver Information Centre:
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. Turn the ignition to off.
4. Turn the ignition off and start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine).
2. Press the range button until the OIL LIFE INDEX is displayed.
3. Press and hold the AVERAGE SPEED and RANGE buttons until the display resets to 100.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
1. Turn the key to off position.
2. Press and hold the SELECT and RESET buttons on the instrument panel and turn the ignition to position (II) - do not start the engine.
3. Hold the SELECT and RESET buttons until the indicator resets.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
1. Turn the ignition to run (one position before starting engine).
