2008 Ford Taurus

1. Turn the ignition to run (one position before starting engine).
2. Press and release SETUP to display "OIL LIFE XXX% HOLD RESET = NEW".
3. Press and hold RESET for 2 seconds and release to reset the oil life to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

2015 Dodge Grand Caravan

To reset the 2015 Dodge Grand Caravan, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Fully depress the accelerator pedal slowly three times within 10 seconds.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

2008 Jeep Commander

1. Turn the ignition to run (one position before starting engine).
2. Fully depress the accelerator pedal slowly three times within 10 seconds.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

2015 MAZDA3

To reset the 2015 MAZDA 3 maintenance monitor, please follow these instructions:

TRIP button reset:

1. Press and hold the TRIP button with the ignition switched off.

Trip Button

2. Continue to hold the TRIP button and switch the ignition on.

3. After 5 seconds the master warning light will flash for a few seconds to indicate the reset is complete.

4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Touch Screen:

1. Turn the ignition to run (one position before starting the engine).

2. Select the Applications (A) icon.

3. Select Maintenance to display the maintenance list screen and select Oil Change.

4. Select Reset and follow the prompts.

5. Turn the ignition off and then start the engine to verify the indicator has been reset.

Home Screen

2013 Chevrolet Orlando

1. Turn the ignition to run (one position before starting engine).

2. Press the DIC MENU button on the turn signal lever to enter the Vehicle Information Menu.
3. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE.
4. Press the SET/CLR button to reset the oil life at 100%.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2015 Ford Escape

To reset the 2015 Ford Escape oil life %, please follow these instructions:

1. Turn the ignition to the on position (do not start the engine).

2. Press both the accelerator and brake pedals at the same time.

3. Keep both pedals fully pressed.

4. After three seconds, the Service: Oil reset in prog. message will be displayed.

5. After 25 seconds, the Service: Oil reset complete message will be displayed.

6. Release both the accelerator and brake pedals.

7. The Service: Oil reset complete message will no longer be displayed.

8. Rotate the key to the off position. For vehicles with push-button start, press the start button to turn the vehicle off completely.

Instrument Cluster

2005 Land Rover Range Rover Sport

Land Rover recommends the use of a reset tool.

2015 Honda CR-V

To reset the 2015 Honda CR-V engine oil life, please follow these instructions:

Models with information display:

Information Display

1. Turn the ignition switch to ON (do not start the engine).

2. Display the engine oil life by repeatedly pressing the (Select/Reset) knob.

3. Press and hold the knob for 10 seconds or more. The engine oil life indicator and the maintenance item codes blink.

Models with multi-information display:

Multi-Information Display

1. Turn the ignition switch to ON (do not start the engine).

2. Select VEHICLE SETTINGS using the up or down arrows, then press the SEL/RESET button.

3. Select MAINTENANCE RESET using the up or down arrows, then press the SEL/RESET button.

4. Select RESET using the up or down arrows, then press the SEL/RESET button.  The displayed maintenance items disappear, and the engine oil life display returns to 100%.

5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Press and release the SELECT/RESET stem to display "OIL LIFE XXX% HOLD RESET = NEW".
3. Press and hold the SELECT/RESET stem for two seconds and release to reset the oil life to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Optional Message Center (if equipped)

1. Turn the ignition to run (one position before starting engine).
2. Use the left steering wheel controls to scroll through the message center. Press the up/down arrow repeatedly until SETTINGS is highlighted. Press OK to select.
3. Press the up/down arrow repeatedly until OIL LIFE RESET is selected. Press OK to select.
4. Set to XXX% is displayed. Press and hold OK to set to 100%.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2015 RAM 1500

To reset the 2015 RAM 1500, please follow these instructions:

Controls

Driver Information Display (DID)

1. Without pushing the brake pedal, cycle the ignition to the ON/RUN position (do not start the engine).

2. Push and release the DOWN arrow button to scroll downward through the main menu to “ Vehicle Info.”

3. Push and release the RIGHT arrow button to access the “ Oil Life” screen.

4. Push and hold the RIGHT arrow button for one second to access the “ Oil Life Reset” screen.

5. Push and release the DOWN arrow button to select “ Yes,” then push and release the RIGHT arrow button to select reset of the Oil Life.

6. Push and release the Up arrow button to exit the DID screen.

 

Driver Information Display

Electronic Vehicle Information Center (EVIC)

1. Without pushing the brake pedal, push the ENGINE START/STOP button and place the ignition to the ON/RUN position (do not start the engine).

2. Push and release the LEFT arrow then press and release the DOWN arrow button to scroll downward through the main menu to “Vehicle Info.”

3. Push and release the RIGHT arrow button to access the “Vehicle Info” screen then scroll UP or DOWN to select “Oil Life.”

4. Push and hold the RIGHT arrow button to select “Reset,” then select “NO” or “YES” by pressing the RIGHT arrow then press the RIGHT arrow button to select reset of the Oil Life to 100%.

5. Push and release the Up arrow button to exit the EVIC screen.

Electronic Vehicle Information Center