Tired of ads? Remove them as a Premium Member. Read more

2006 TOYOTA Matrix Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2006 TOYOTA Matrix Maintenance Light Reset Instructions
2006 Toyota Matrix

2006 Toyota Matrix

To reset the 2006 Toyota Matrix maintenance light, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2009 TOYOTA Yaris Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2009 TOYOTA Yaris Maintenance Light Reset Instructions
2009 Toyota Yaris

2009 Toyota Yaris

To reset the 2009 Toyota Yaris maintenance light, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2006 TOYOTA Sequoia Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2006 TOYOTA Sequoia Maintenance Light Reset Instructions
2006 Toyota Sequoia

2006 Toyota Sequoia

To reset the 2006 Toyota Sequoia maintenance light, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2007 TOYOTA Tacoma Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2007 TOYOTA Tacoma Maintenance Light Reset Instructions
2007 Toyota Tacoma

2007 Toyota Tacoma

To reset the 2007 Toyota Tacoma maintenance light, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2009 TOYOTA Venza Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2009 TOYOTA Venza Maintenance Light Reset Instructions
2009 Toyota Venza

2009 Toyota Venza

To reset the 2009 Toyota Venza maintenance light, please follow these instructions:

1. Start the engine and bring up the trip meter A reading.
Vehicles with smart key system:
2. Turn the “ENGINE START STOP” switch off.
3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine).
4. Continue to press and hold the button until the trip meter displays "000000".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Vehicles without smart key system:
2. Turn the ignition switch off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2005 TOYOTA Camry Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2005 TOYOTA Camry Maintenance Light Reset Instructions
2005 Toyota Camry

2005 Toyota Camry

To reset the 2005 Toyota Camry maintenance light, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2006 TOYOTA Sienna Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2006 TOYOTA Sienna Maintenance Light Reset Instructions
2006 Toyota Sienna

2006 Toyota Sienna

To reset the 2006 Toyota Sienna maintenance light, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




1994 VOLKSWAGEN Golf/GTI Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 1994 VOLKSWAGEN Golf/GTI Maintenance Light Reset Instructions
1994 Volkswagen Golf

1994 Volkswagen Golf

To reset the 1994 Volkswagen Golf/GTI maintenance light, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Press and hold the button located under the speedometer.
3. Switch ignition off and release button. Message OIL appears in the display.
4. Press MINUTE button of digital clock or button for setting analog clock only as long as 5 dashes appears in display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2006 TOYOTA Tacoma Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2006 TOYOTA Tacoma Maintenance Light Reset Instructions
2006 Toyota Tacoma

2006 Toyota Tacoma

To reset the 2006 Toyota Tacoma maintenance light, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2005 TOYOTA 4Runner Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 2005 TOYOTA 4Runner Maintenance Light Reset Instructions
2005 Toyota 4Runner

2005 Toyota 4Runner

To reset the 2005 Toyota 4Runner maintenance light, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Bring up the odometer reading using the trip meter reset knob then the turn ignition off.
3. Hold down knob while turning the ignition key to the run position (one position before starting engine).
4. Hold down the knob until the light goes off. Before the light goes off, it illuminates for 3 seconds, flashes for 2 seconds and illuminates for 1 second. If the system fails to reset, the light will remain flashing. In this case, return to step 1 and try again.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.





Remove ads as a Premium Member. Read More