Tired of ads? Remove them as a Premium Member. Read more

2011 BUICK Enclave Maintenance Light Reset Instructions

Instructions Comments Off on 2011 BUICK Enclave Maintenance Light Reset Instructions
2011 Buick Enclave

2011 Buick Enclave

1. Turn the ignition to run (one position before starting engine).
2. Press the vehicle information button (i) until OIL LIFE REMAINING displays.
3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
4. Start the engine and verify CHANGE OIL SOON light goes out (if this does not happen, turn off the engine and repeat steps).




How to Reset the 2017 Honda Ridgeline Engine Oil Life

Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on How to Reset the 2017 Honda Ridgeline Engine Oil Life
2017 Honda Ridgeline

2017 Honda Ridgeline

To reset the 2017 Honda Ridgeline engine oil life after an oil change service, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Using the UP or DOWN arrows on the right side of the steering wheel, select the VEHICLE menu.
3. From the VEHICLE menu select MAINTENANCE INFO.
4. From the MAINTENANCE INFO menu select MAINTENANCE RESET.
5. Press and hold the RESET button to display the oil life.
6. Select RESET with the UP or DOWN arrows then push the RESET button.
7. The displayed maintenance disappears and the oil life returns to 100%.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

2017 Honda Ridgeline Steering Wheel Controls

2017 Honda Ridgeline Steering Wheel Controls




How to Reset the 2017 Honda Pilot Engine Oil Life

Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on How to Reset the 2017 Honda Pilot Engine Oil Life
2017 Honda Pilot

2017 Honda Pilot

To reset the 2017 Honda Pilot engine oil life after an oil change service, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Using the UP or DOWN arrows on the right side of the steering wheel, select the VEHICLE menu.
3. From the VEHICLE menu select MAINTENANCE INFO.
4. From the MAINTENANCE INFO menu select MAINTENANCE RESET.
5. Press and hold the RESET button to display the oil life.
6. Select RESET with the UP or DOWN arrows then push the RESET button.
7. The displayed maintenance disappears and the oil life returns to 100%.
8. Turn the ignition off and then start the engine to verify the indicator has been reset.

2017 Honda Pilot Steering Wheel Controls

2017 Honda Pilot Steering Wheel Controls




2011 BUICK LaCrosse Maintenance Light Reset Instructions

Instructions Comments Off on 2011 BUICK LaCrosse Maintenance Light Reset Instructions
2011 Buick LaCrosse

2011 Buick LaCrosse

1. Turn the ignition to run (one position before starting engine).
2. Press the DIC menu button on the turn signal lever to enter the vehicle information menu. Use the thumbwheel to scroll through the menu items until you reach REMAINING OIL LIFE.
3. Press the SET/CLR button to reset the oil life to 100%.
4. Turn the ignition off and start the engine to verify the indicator has been reset.




How to Reset the 2017 Honda Odyssey Engine Oil Life

Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on How to Reset the 2017 Honda Odyssey Engine Oil Life
2017 Honda Odyssey

2017 Honda Odyssey

To reset the 2017 Honda Odyssey engine oil life after an oil change service, please follow these instructions:

non Multi-Information Display:
1. Turn the ignition to run (one position before starting engine).
2. Press and hold the SELECT/RESET knob for 10 seconds or more. The information display show the initial reset mode.
3. Select oil life with the SELECT/RESET knob.
4. Press and hold the SELECT/RESET knob for a few seconds to enter the reset mode.
5. Press and hold the SELECT/RESET knob for 5 seconds or more. The engine oil display will return to 100%.

Multi-Information Display:
1. Turn the ignition to run (one position before starting engine).
2. Display the engine oil life by repeatedly pressing the SEL/RESET button.
3. Press and hold the SEL/RESET for more than 10 seconds. The oil life reset mode is displayed on the multi information display.
4. Select RESET with the up or down button, then press the SEL/RESET button. The engine oil life will reset to 100.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

2017 Honda Odyssey Steering Wheel Controls

2017 Honda Odyssey Steering Wheel Controls

Honda Odyssey Trip Button Reset

Honda Odyssey Trip Button Reset




2008 BUICK LaCrosse Maintenance Light Reset Instructions

Instructions Comments Off on 2008 BUICK LaCrosse Maintenance Light Reset Instructions
2008 Buick LaCrosse

2008 Buick LaCrosse

With Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Press the OPTION button on the DIC until ENGINE OIL MONITOR appears on the DIC screen.
3. Press the SET/RESET button to reset the system. The next screen indicates that the CHANGE OIL SOON message has been reset. If the vehicle has the up level DIC, when the gauges button is pressed and the OIL LIFE REMAINING mode appears, it should read 100% OIL LIFE REMAINING.
4. Turn the ignition off and start the engine to verify the indicator has been reset.

Without Driver Information Centre:
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the CHANGE OIL SOON indicator flashes, the system is reset (if this does not happen, turn off the
engine and repeat steps).
4. Turn the ignition off and start the engine to verify the indicator has been reset.




1993 BUICK LeSabre Maintenance Light Reset Instructions

Daily Oil Light Reset Tip, Instructions Comments Off on 1993 BUICK LeSabre Maintenance Light Reset Instructions
1993 Buick LeSabre

1993 Buick LeSabre

1. Turn the ignition to run (one position before starting engine).
2. Use a paperclip to push and hold the RESET button for 5 seconds. The CHANGE OIL SOON indicator
flashes to indicate the system is reset.
3. Turn the ignition off and start the engine to verify the indicator has been reset.
*The RESET button is under the passenger side glove compartment.




How to Reset the 2017 HR-V Engine Oil Life

Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on How to Reset the 2017 HR-V Engine Oil Life
2017 Honda HR-V

2017 Honda HR-V

To reset the 2017 HR-V engine oil life after an oil change service, please follow these instructions:

1. Turn the ignition switch to run (do not start the engine).
2. Display the engine oil life by repeatedly pressing the SELECT/RESET knob.
3. Press and hold the knob for 10 seconds or more. The engine oil life indicator and maintenance item codes blink.
4. Press the SELECT/RESET knob for 5 or more seconds. The displayed maintenance items disappear and the oil life returns to 100%.
5. Turn the ignition off and start the engine to verify the indicator has been reset.




How to Reset the 2017 Honda Fit Engine Oil Life

Automotive, Daily Oil Light Reset Tip, Instructions Comments Off on How to Reset the 2017 Honda Fit Engine Oil Life
2017 Honda Fit

2017 Honda Fit

To reset the 2017 Honda Fit engine oil life % after an oil change service, please follow these instructions:

1. Turn the ignition to run (one position before starting engine).
2. Press the SELECT/RESET knob repeatedly until the engine oil life indicator is displayed.
3. Press the SELECT/RESET knob for more than 10 seconds. The engine oil life indicator and the maintenance code(s) will blink.
4. Press the SELECT/RESET knob for more than 5 seconds. The maintenance items code(s) will disappear, and the engine oil life will reset to 100.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2006 BUICK LaCrosse Maintenance Light Reset Instructions

Instructions Comments Off on 2006 BUICK LaCrosse Maintenance Light Reset Instructions
2006 Buick LaCrosse

2006 Buick LaCrosse

With Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Press the OPTION button on the DIC until ENGINE OIL MONITOR appears on the DIC screen.
3. Press the SET/RESET button to reset the system. The next screen indicates that the CHANGE OIL SOON message has been reset. If the vehicle has the up level DIC, when the gauges button is pressed and the OIL LIFE REMAINING mode appears, it should read 100% OIL LIFE REMAINING.
4. Turn the ignition off and start the engine to verify the indicator has been reset.

Without Driver Information Centre:
1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the CHANGE OIL SOON indicator flashes, the system is reset (if this does not happen, turn off the
engine and repeat steps).
4. Turn the ignition off and start the engine to verify the indicator has been reset.





Remove ads as a Premium Member. Read More