Tired of ads? Remove them as a Premium Member. Read more

2005 CADILLAC STS Maintenance Light Reset Instructions

Instructions Comments Off on 2005 CADILLAC STS Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press the up or down arrow to scroll the DIC (i) to show OIL LIFE.
3. Once the XXX% ENGINE OIL LIFE menu item is highlighted, press and hold the RESET button on the smaller (i//) button until the percentage shows 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2013 CADILLAC SRX Maintenance Light Reset Instructions

Instructions Comments Off on 2013 CADILLAC SRX Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. *Use the DIC controls on the right side of the steering wheel to display the REMAINING OIL LIFE.
3. Press SEL on the DIC controls.
4. Hold SEL down for a few seconds to reset the oil life to 100%.
5. Turn the ignition off and start the engine to verify the indicator has been reset.
*Remaining oil life can also be reset by depressing the gas pedal 3 times within 5 seconds instead of using the DIC...




2012 CADILLAC SRX Maintenance Light Reset Instructions

Instructions Comments Off on 2012 CADILLAC SRX Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press the DIC MENU button on turn signal lever and then use the thumbwheel to display REMAINING OIL LIFE on DIC.
3. Press the SET/CLR button to reset the oil life to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

or

1. Turn the ignition to run (one position before starting engine).
2. Fully press and release the gas pedal 3 times within 5 seconds.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.




2011 CADILLAC SRX Maintenance Light Reset Instructions

Instructions Comments Off on 2011 CADILLAC SRX Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press the DIC MENU button on turn signal lever and then use the thumbwheel to display REMAINING OIL LIFE on DIC.
3. Press the SET/CLR button to reset the oil life to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

or

1. Turn the ignition to run (one position before starting engine).
2. Fully press and release the gas pedal 3 times within 5 seconds.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.




2010 CADILLAC SRX Maintenance Light Reset Instructions

Instructions Comments Off on 2010 CADILLAC SRX Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the “Change Engine Oil Soon” message is not on, the system is reset. If it is on, turn the ignition off and repeat steps 1-2.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2009 CADILLAC SRX Maintenance Light Reset Instructions

Instructions Comments Off on 2009 CADILLAC SRX Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Display the OIL LIFE REMAINING on the DIC.
3. Press and hold the SET/RESET button on the DIC for more than 5 seconds. The oil life will change to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2008 CADILLAC SRX Maintenance Light Reset Instructions

Instructions Comments Off on 2008 CADILLAC SRX Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Display the OIL LIFE REMAINING on the DIC.
3. Press and hold the SET/RESET button on the DIC for more than 5 seconds. The oil life will change to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2007 CADILLAC SRX Maintenance Light Reset Instructions

Instructions Comments Off on 2007 CADILLAC SRX Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Display the OIL LIFE REMAINING on the DIC.
3. Press and hold the SET/RESET button on the DIC for more than 5 seconds. The oil life will change to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2006 CADILLAC SRX Maintenance Light Reset Instructions

Instructions Comments Off on 2006 CADILLAC SRX Maintenance Light Reset Instructions

With Base Audio System:
1. Turn the ignition to run (one position before starting engine).
2. Press the up or down arrow on the INFO button located to the right of the Driver Information Centre (DIC) display to access the DIC menu.
3. Once 100% ENGINE OIL LIFE menu is highlighted, press and hold the CLR button. The percentage will return to 100 and the oil life indicator will be reset.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

With Navigation System:
1. Turn the ignition to run (one position before starting engine).
2. Turn the system on by pressing the PWR/VOL button.
3. Press the INFO button located to the left of the display to access the vehicle information menu.
4. Turn the TUNE/SEL knob located to the lower right of the display until Engine Oil Life is highlighted.
5. Press the knob once to select it.
6. Once the 100% Engine Oil Life is displayed, press the multi-function button next to the Reset prompt in
the upper right corner of the display. The percentage will return to 100 and the oil life indicator will be reset.
7. Turn the ignition off and then start the engine to verify the indicator has been reset.




2005 CADILLAC SRX Maintenance Light Reset Instructions

Instructions Comments Off on 2005 CADILLAC SRX Maintenance Light Reset Instructions

With Base Audio System:
1. Turn the ignition to run (one position before starting engine).
2. Press the up or down arrow on the INFO button located to the right of the Driver Information Centre (DIC) display to access the DIC menu.
3. Once 100% ENGINE OIL LIFE menu is highlighted, press and hold the CLR button. The percentage will return to 100 and the oil life indicator will be reset.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

With Navigation System:
1. Turn the ignition to run (one position before starting engine).
2. Turn the system on by pressing the PWR/VOL button.
3. Press the INFO button located to the left of the display to access the vehicle information menu.
4. Turn the TUNE/SEL knob located to the lower right of the display until Engine Oil Life is highlighted.
5. Press the knob once to select it.
6. Once the 100% Engine Oil Life is displayed, press the multi-function button next to the Reset prompt in
the upper right corner of the display. The percentage will return to 100 and the oil life indicator will be reset.
7. Turn the ignition off and then start the engine to verify the indicator has been reset.





Remove ads as a Premium Member. Read More