1. Turn the ignition to run (one position before starting engine). 2. *Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem. 3. Press and hold the SET/RESET (check …
2008 CHEVROLET Suburban Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. *Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem. 3. Press and hold the SET/RESET (check …
2007 CHEVROLET Suburban Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been …
2006 CHEVROLET Suburban Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been …
2005 CHEVROLET Suburban Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been …
2004 CHEVROLET Suburban Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been …
2003 CHEVROLET Suburban Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been …
2002 CHEVROLET Suburban Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been …
2001 CHEVROLET Suburban Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the Change Oil Soon light flashes the system is resetting. 4. Turn the ignition off and then start the engine to verify the indicator has been …
2000 CHEVROLET Suburban Maintenance Light Reset Instructions Read More »
1. Turn the ignition to run (one position before starting engine). 2. *Display the OIL LIFE REMAINING on the DIC (i button). If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display by pressing the trip odometer reset stem. 3. Press and hold the SET/RESET (arrow) …
2013 CHEVROLET Silverado Maintenance Light Reset Instructions Read More »
News and information from the automotive industry
