1. Turn the ignition to run (one position before starting engine).
2. Press the MENU button located on the turn signal lever.
3. Use the thumbwheel to scroll to REMAINING OIL LIFE.
4. To reset the engine oil life system, press the SET/CLR button while the oil life display is active. After a few seconds, there will be a single chime and the oil life will be reset to 100%.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

With Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Press the vehicle information button (i) until OIL LIFE REMAINING displays.
3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Without Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine). The vehicle must be in PARK (P)
to access this display. Press the trip odometer reset stem until OIL LIFE REMAINING displays.
2. Press and hold the trip odometer reset stem until OIL LIFE REMAINING shows 100%. You will
hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

With Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Press the vehicle information button (i) until OIL LIFE REMAINING displays.
3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Without Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine). The vehicle must be in PARK (P)
to access this display. Press the trip odometer reset stem until OIL LIFE REMAINING displays.
2. Press and hold the trip odometer reset stem until OIL LIFE REMAINING shows 100%. You will
hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

With Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Press the vehicle information button (i) until OIL LIFE REMAINING displays.
3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Without Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine). The vehicle must be in PARK (P)
to access this display. Press the trip odometer reset stem until OIL LIFE REMAINING displays.
2. Press and hold the trip odometer reset stem until OIL LIFE REMAINING shows 100%. You will
hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

With Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Press the vehicle information button (i) until OIL LIFE REMAINING displays.
3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Without Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine). The vehicle must be in PARK (P)
to access this display. Press the trip odometer reset stem until OIL LIFE REMAINING displays.
2. Press and hold the trip odometer reset stem until OIL LIFE REMAINING shows 100%. You will
hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

With Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine).
2. Press the vehicle information button (i) until OIL LIFE REMAINING displays.
3. Press and hold the SET/RESET (check mark) button until 100% is displayed. You will hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

Without Driver Information Centre (DIC):
1. Turn the ignition to run (one position before starting engine). The vehicle must be in PARK (P)
to access this display. Press the trip odometer reset stem until OIL LIFE REMAINING displays.
2. Press and hold the trip odometer reset stem until OIL LIFE REMAINING shows 100%. You will
hear 3 chimes and the CHANGE ENGINE OIL SOON message will go off.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes the system is resetting.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes the system is resetting.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes the system is resetting.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds.
3. If the Change Oil Soon light flashes the system is resetting.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.