Tired of ads? Remove them as a Premium Member. Read more

2010 HUMMER H3 Maintenance Light Reset Instructions

Instructions Comments Off on 2010 HUMMER H3 Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press and release the stem in the lower center of the instrument cluster until the OIL LIFE message is displayed.
3. Once the alternating OIL LIFE and RESET messages appear, press and hold the stem until several beeps sound. This confirms that the oil life system has been reset.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2009 HUMMER H3 Maintenance Light Reset Instructions

Instructions Comments Off on 2009 HUMMER H3 Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press and release the stem in the lower center of the instrument cluster until the OIL LIFE message is displayed.
3. Once the alternating OIL LIFE and RESET messages appear, press and hold the stem until several beeps sound. This confirms that the oil life system has been reset.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2008 HUMMER H3 Maintenance Light Reset Instructions

Instructions Comments Off on 2008 HUMMER H3 Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press and release the stem in the lower center of the instrument cluster until the OIL LIFE message is displayed.
3. Once the alternating OIL LIFE and RESET messages appear, press and hold the stem until several beeps sound. This confirms that the oil life system has been reset.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2007 HUMMER H3 Maintenance Light Reset Instructions

Instructions Comments Off on 2007 HUMMER H3 Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press and release the stem in the lower center of the instrument cluster until the OIL LIFE message is displayed.
3. Once the alternating OIL LIFE and RESET messages appear, press and hold the stem until several beeps sound. This confirms that the oil life system has been reset.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2006 HUMMER H3 Maintenance Light Reset Instructions

Instructions Comments Off on 2006 HUMMER H3 Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press and release the stem in the lower center of the instrument cluster until the OIL LIFE message is displayed.
3. Once the alternating OIL LIFE and RESET messages appear, press and hold the stem until several beeps sound. This confirms that the oil life system has been reset.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2010 HUMMER H2 Maintenance Light Reset Instructions

Instructions Comments Off on 2010 HUMMER H2 Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Display the OIL LIFE REMAINING on the DIC by pressing the (i) button.
3. Press and hold the SET/RESET button (check mark button) on the DIC for more than 5 seconds. The oil life will change to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2009 HUMMER H2 Maintenance Light Reset Instructions

Instructions Comments Off on 2009 HUMMER H2 Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Display the OIL LIFE REMAINING on the DIC by pressing the (i) button.
3. Press and hold the SET/RESET button (check mark button) on the DIC for more than 5 seconds. The oil life will change to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2008 HUMMER H2 Maintenance Light Reset Instructions

Instructions Comments Off on 2008 HUMMER H2 Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Display the OIL LIFE REMAINING on the DIC by pressing the (i) button.
3. Press and hold the SET/RESET button (check mark button) on the DIC for more than 5 seconds. The oil life will change to 100%.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2007 HUMMER H2 Maintenance Light Reset Instructions

Instructions Comments Off on 2007 HUMMER H2 Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Immediately after step 1 press and release the accelerator pedal 3 times within 5 seconds. If the OIL LIFE RESET message flashes for 10 seconds, the system is resetting.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.




2006 HUMMER H2 Maintenance Light Reset Instructions

Instructions Comments Off on 2006 HUMMER H2 Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Immediately after step 1 press and release the accelerator pedal 3 times within 5 seconds. If the OIL LIFE RESET message flashes for 10 seconds, the system is resetting.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.





Remove ads as a Premium Member. Read More