1. Turn the ignition to run (push START/STOP button once).
2. Switches for the trip computer are located on the right side of the combination meter panel. Press the square button to bring up "Setting" and press the circle button to select.
3. Use the circle button to scroll to MAINTENANCE and use the square button to select.
4. Select ENGINE OIL to set or reset the distance for changing the oil.
5. Repeat step 2 to set or reset the distance for the OIL FILTER.
6. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1.
3. Select MAINTENANCE and then select the Engine Oil key using the joystick and press the ENTER button to display the screen to change the maintenance interval/RESET.
4. To return to the previous display after the MAINTENANCE NOTICE screen is displayed, press the BACK button.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1.
3. Select MAINTENANCE and then select the Engine Oil key using the joystick and press the ENTER button to display the screen to change the maintenance interval/RESET.
4. To return to the previous display after the MAINTENANCE NOTICE screen is displayed, press the BACK button.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. When the TRIP button is pressed, the following modes will display on the screen: Warning message (if any) TRIP1 > TRIP 2 > FUEL ECONOMY > MAINTENANCE > AUDIO OR OFF > TRIP 1.
3. Select MAINTENANCE and then select the Engine Oil key using the joystick and press the ENTER button to display the screen to change the maintenance interval/RESET.
4. To return to the previous display after the MAINTENANCE NOTICE screen is displayed, press the BACK button.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine/push START/STOP button once).
2. Press the square button , located on the steering wheel to the left, to display the SETTINGS mode.
3. Use the up/down arrow buttons to highlight SETTINGS and confirm with the ENTER button.
4. From the SETTINGS menu select MAINTENANCE and confirm with the ENTER button.
5. Select the maintenance item to be reset; reset distance and confirm with the ENTER button.
6. Repeat for any other MAINTENANCE items.
7. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Press the INFO button and select the Maintenance Key using the NISSAN controller; the maintenance information will be displayed on the screen.
3. Select one of the Reminder (1 - 4) keys using the NISSAN controller and press the ENTER button to display the screen to change the maintenance interval.
4. To reset the reminder schedule (distance) to 0 mi (km), select the Reset Distance key using the ENTER button.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Press the INFO button and select the Maintenance Key using the NISSAN controller; the maintenance information will be displayed on the screen.
3. Select one of the Reminder (1 - 4) keys using the NISSAN controller and press the ENTER button to display the screen to change the maintenance interval.
4. To reset the reminder schedule (distance) to 0 mi (km), select the Reset Distance key using the ENTER button.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Press the INFO button and select the Maintenance Key using the NISSAN controller; the maintenance information will be displayed on the screen.
3. Select one of the Reminder (1 - 4) keys using the NISSAN controller and press the ENTER button to display the screen to change the maintenance interval.
4. To reset the reminder schedule (distance) to 0 mi (km), select the Reset Distance key using the ENTER button.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Press the INFO button and select the Maintenance Key using the NISSAN controller; the maintenance information will be displayed on the screen.
3. Select one of the Reminder (1 - 4) keys using the NISSAN controller and press the ENTER button to display the screen to change the maintenance interval.
4. To reset the reminder schedule (distance) to 0 mi (km), select the Reset Distance key using the ENTER button.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Press the INFO button and select the Maintenance Key using the NISSAN controller; the maintenance information will be displayed on the screen.
3. Select one of the Reminder (1 - 4) keys using the NISSAN controller and press the ENTER button to display the screen to change the maintenance interval.
4. To reset the reminder schedule (distance) to 0 mi (km), select the Reset Distance key using the ENTER button.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.