Tired of ads? Remove them as a Premium Member. Read more

2005 SATURN L300 Maintenance Light Reset Instructions

Instructions Comments Off on 2005 SATURN L300 Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. If the Change Engine Oil light is flashing, the system is reset. The light will flash for up to 30 seconds or until the ignition is turned off. If the light comes on again and stays on for 30 seconds at the next engine start, it did not reset. You will need to reset the system again.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.




2007 SATURN Ion Maintenance Light Reset Instructions

Instructions Comments Off on 2007 SATURN Ion Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press and release the trip/reset button until the OIL LIFE message is displayed.
3. Then press and hold the trip/reset button until a chime sounds 5 times, and RESET is displayed in the message centre. When the system is reset, the odometer will again be displayed in the message centre.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2006 SATURN Ion Maintenance Light Reset Instructions

Instructions Comments Off on 2006 SATURN Ion Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press and release the trip/reset button until the OIL LIFE message is displayed.
3. Then press and hold the trip/reset button until a chime sounds 5 times, and RESET is displayed in the message centre. When the system is reset, the odometer will again be displayed in the message centre.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2005 SATURN Ion Maintenance Light Reset Instructions

Instructions Comments Off on 2005 SATURN Ion Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Press and release the trip/reset button until the OIL LIFE message is displayed.
3. Then press and hold the trip/reset button until a chime sounds 5 times, and RESET is displayed in the message centre. When the system is reset, the odometer will again be displayed in the message centre.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.




2009 SATURN Aura Maintenance Light Reset Instructions

Instructions Comments Off on 2009 SATURN Aura Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. If the message is not displayed, the system is reset. If the CHANGE OIL SOON message comes back on when you start the vehicle, the engine oil life system has not reset. Repeat the procedure.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.




2009 SAAB 9-7x Maintenance Light Reset Instructions

Instructions Comments Off on 2009 SAAB 9-7x Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Use the fuel button on the Driver Information Center to reach the ENGINE OIL LIFE screen.
3. Press and hold the select button on the DIC for 5 seconds while ENGINE OIL LIFE is displayed.
4. OIL LIFE RESET will appear on the DIC display for 10 seconds to let you know the system is reset. If the change oil light comes back on when you start your vehicle, the engine oil life system has not reset, repeat the procedure.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2008 SAAB 9-7x Maintenance Light Reset Instructions

Instructions Comments Off on 2008 SAAB 9-7x Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Use the fuel button on the Driver Information Center to reach the ENGINE OIL LIFE screen.
3. Press and hold the select button on the DIC for 5 seconds while ENGINE OIL LIFE is displayed.
4. OIL LIFE RESET will appear on the DIC display for 10 seconds to let you know the system is reset. If the change oil light comes back on when you start your vehicle, the engine oil life system has not reset, repeat the procedure.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2007 SAAB 9-7x Maintenance Light Reset Instructions

Instructions Comments Off on 2007 SAAB 9-7x Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Use the fuel button on the Driver Information Center to reach the ENGINE OIL LIFE screen.
3. Press and hold the select button on the DIC for 5 seconds while ENGINE OIL LIFE is displayed.
4. OIL LIFE RESET will appear on the DIC display for 10 seconds to let you know the system is reset. If the change oil light comes back on when you start your vehicle, the engine oil life system has not reset, repeat the procedure.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2006 SAAB 9-7x Maintenance Light Reset Instructions

Instructions Comments Off on 2006 SAAB 9-7x Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. Use the fuel button on the Driver Information Center to reach the ENGINE OIL LIFE screen.
3. Press and hold the select button on the DIC for 5 seconds while ENGINE OIL LIFE is displayed.
4. OIL LIFE RESET will appear on the DIC display for 10 seconds to let you know the system is reset. If the change oil light comes back on when you start your vehicle, the engine oil life system has not reset, repeat the procedure.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.




2009 SAAB 9-5 Maintenance Light Reset Instructions

Instructions Comments Off on 2009 SAAB 9-5 Maintenance Light Reset Instructions

1. Turn the ignition to run (one position before starting engine).
2. You can clear the message by pressing CLEAR once. Reset by pressing CLEAR for at least 8 seconds, until SERVICE appears on the display.
3. Turn the ignition off and then start the engine to verify the indicator has been reset.
*The message can only be deleted when it is shown on the SID (Service Indicator Display).





Remove ads as a Premium Member. Read More