Sep 30
1. Turn the ignition to run (one position before starting engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. While holding down the trip meter reset knob turn the ignition to run (one position before starting engine).
4. Hold down knob for at least 5 seconds. The odometer indicates "000000" and the light goes off. If the system fails to reset, the light will continue flashing.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Sep 29
1. Press the "ENGINE START STOP" switch once (do not start engine).
2. Ensure odometer reading is shown. Turn ignition off.
3. Press the "ENGINE START STOP" switch once (do not start engine). The multi-information screen will be displayed for a few seonds. While it is being displayed press the TRIP switch 3 times and hold it on the third time.
4. Continue to press and hold the button until the trip meter displays "000000".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Sep 28
1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While holding the MPH or KM/H button turn the ignition on (do not start engine).
4. Continue to press and hold the button until the trip meter displays "000000" and the display indicates the reset is complete.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Sep 27
1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While holding the MPH or KM/H button turn the ignition on (do not start engine).
4. Continue to press and hold the button until the trip meter displays "000000" and the display indicates the reset is complete.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Sep 26
1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While holding the MPH or KM/H button turn the ignition on (do not start engine).
4. Continue to press and hold the button until the trip meter displays "000000" and the display indicates the reset is complete.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Sep 25
1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While holding the MPH or KM/H button turn the ignition on (do not start engine).
4. Continue to press and hold the button until the trip meter displays "000000" and the display indicates the reset is complete.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Sep 24
1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While holding the MPH or KM/H button turn the ignition on (do not start engine).
4. Continue to press and hold the button until the trip meter displays "000000" and the display indicates the reset is complete.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Sep 23
1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While holding the MPH or KM/H button turn the ignition on (do not start engine).
4. Continue to press and hold the button until the trip meter displays "000000" and the display indicates the reset is complete.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Sep 22
1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine) or turn ignition to run (one position before starting engine).
4. Continue to press and hold the button until the trip meter displays "000000".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.
Sep 21
1. Press the "ENGINE START STOP" switch once (do not start engine) or turn ignition key to run (one position before starting engine).
2. Ensure Trip Metre A reading is shown. Turn the ignition off.
3. While pressing the Trip Meter reset button, press the "ENGINE START STOP" switch once (do not start engine) or turn ignition to run (one position before starting engine).
4. Continue to press and hold the button until the trip meter displays "000000".
5. Turn the ignition off and then start the engine to verify the indicator has been reset.