1. Turn the ignition to run (one position before starting engine).
2. Acess the settings menu:
i) Use the windshield wiper lever toggle switch or
ii) Use the buttons on the right hand side of the multi function steering wheel
3. Select the "Settings" menu followed by the "Service" submenu. Select "Reset" and confirm.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
or
2.With the ignition switch off press and hold the 0,0 button.
3. Turn the igntion on (do not start the engine) and the service interval display is now in reset mode. Release the 0,0 button.
4. Withn 20 seconds press the min button and wait for the display to switch back to the normal display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Acess the settings menu:
i) Use the windshield wiper lever toggle switch or
ii) Use the buttons on the right hand side of the multi function steering wheel
3. Select the "Settings" menu followed by the "Service" submenu. Select "Reset" and confirm.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
or
2.With the ignition switch off press and hold the 0,0 button.
3. Turn the igntion on (do not start the engine) and the service interval display is now in reset mode. Release the 0,0 button.
4. Withn 20 seconds press the min button and wait for the display to switch back to the normal display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Acess the settings menu:
i) Use the windshield wiper lever toggle switch or
ii) Use the buttons on the right hand side of the multi function steering wheel
3. Select the "Settings" menu followed by the "Service" submenu. Select "Reset" and confirm.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
or
2.With the ignition switch off press and hold the 0,0 button.
3. Turn the igntion on (do not start the engine) and the service interval display is now in reset mode. Release the 0,0 button.
4. Withn 20 seconds press the min button and wait for the display to switch back to the normal display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Acess the settings menu:
i) Use the windshield wiper lever toggle switch or
ii) Use the buttons on the right hand side of the multi function steering wheel
3. Select the "Settings" menu followed by the "Service" submenu. Select "Reset" and confirm.
4. Turn the ignition off and then start the engine to verify the indicator has been reset.
or
2.With the ignition switch off press and hold the 0,0 button.
3. Turn the igntion on (do not start the engine) and the service interval display is now in reset mode. Release the 0,0 button.
4. Withn 20 seconds press the min button and wait for the display to switch back to the normal display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Press and hold the button located under the speedometer.
3. Switch ignition off and release button. Message OIL appears in the display.
4. Press MINUTE button of digital clock or button for setting analog clock only as long as 5 dashes appears in display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Press and hold the button located under the speedometer.
3. Switch ignition off and release button. Message OIL appears in the display.
4. Press MINUTE button of digital clock or button for setting analog clock only as long as 5 dashes appears in display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Press and hold the button located under the speedometer.
3. Switch ignition off and release button. Message OIL appears in the display.
4. Press MINUTE button of digital clock or button for setting analog clock only as long as 5 dashes appears in display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

1. Turn the ignition to run (one position before starting engine).
2. Press and hold the button located under the speedometer.
3. Switch ignition off and release button. Message OIL appears in the display.
4. Press MINUTE button of digital clock or button for setting analog clock only as long as 5 dashes appears in display.
5. Turn the ignition off and then start the engine to verify the indicator has been reset.

VW recommends the use of a reset tool.

VW recommends the use of a reset tool.